Secure Mobile Access 100 10.2 User Guide

Table of Contents

Configuring Proxy Settings

Secure Mobile Access supports NetExtender sessions using proxy configurations. Currently, only HTTPS proxy is supported. When launching NetExtender from the Web portal, if your browser is already configured for proxy access, NetExtender automatically inherits the proxy settings.

To manually configure NetExtender proxy settings

  1. Click the Properties icon in the system tray. The NetExtender Properties window displays.

  2. Click Proxy.

  3. Select Enable proxy settings.

  4. NetExtender provides three options for configuring proxy settings:

    • Automatically detect settings – To use this setting, the proxy server must support Web Proxy Auto Discovery Protocol (WPAD)) that can push the proxy settings script to the client automatically.
    • Use automatic configuration script – If you know the location of the proxy settings script, select this option and enter the URL of the scrip in the Address field.
    • Use proxy server – Select this option to enter the Address and Port of the proxy server. Optionally, you can enter an IP address or domain in the BypassProxy field to allow direct connections to those addresses that bypass the proxy server. If required, enter a User name and Password for the proxy server. If the proxy server requires a username and password, but you do not specify them in the Properties window, a NetExtender pop-up window prompts you to enter them when you first connect.
  5. Click Apply to save your changes.