Secure Mobile Access 100 10.2 Upgrade Guide
- Secure Mobile Access 10.2 for the SMA 100 Series
- Introduction
- Obtaining The Latest Secure Mobile Access Firmware
- Exporting a Copy of your Configuration Settings
- Upgrading the Appliance with New Firmware
- Upgrading SMA 100 Series in a High-Availability (HA) Pair
- Resetting the SMA Physical Appliance using SafeMode
- Importing Configuration Settings
- Resetting SMA to Factory Default Settings
- SonicWall Support
Resetting SMA to Factory Default Settings via Appliance
To reset your SMA to its factory default settings via appliance
-
Navigate to System > Settings.
-
Under Settings Management, click Export and file settings file locally.
-
Under the Firmware Management | Current Firmware hover over the firmware and click the I/O button.
The BOOT FIRMWARE window appears.
-
On the BOOT FIRMWARE window, switch the toggle to enable the Boot with factory default settings.
-
Click Boot.
Was This Article Helpful?
Help us to improve our support portal