Network Security Management Administration Guide
- Network Security Manager 2.5.0
- Network Security Manager Overview
- Dashboard
- Firewalls
- Templates and Variables
- SonicWall Switch Configuration in Template
- Certificates
- Configuration Management
- Tenants
- VPN Topology
- SD-WAN Topology
- CSC Users
- Scheduled Reports
- System Events
- SonicWall Support
Zero Touch Status
The ZERO TOUCH STATUS section under ZT, Analytics & Reporting Status provides information on zero-touch connection between firewall and NSM. The ZERO TOUCH STATUS section is displayed only for firewalls that have zero-touch feature enabled.
VERSION 2.0
Zero Touch 2.0 (also known as Instant Connect) is a new microservices-based architecture to simplify on-boarding of firewalls and establish a reliable connectivity between NSM and firewall. With the new architecture, there is no change in the ports used for communication between NSM and firewall.
Term | Description |
---|---|
Status | Status of Zero touch 2.0 between firewall and NSM |
Error | Displays any error with the status of connection. |
Device Public IP | The IP address of the device. |
Device Public Port | Port number of the device. |
Time Device Connected | Time at which zero touch connection is initiated and firewall is connected with NSM. |
Time Device Disconnected | Time at which zero touch connection drops and firewall is disconnected from NSM. |
Connection Up Time | Total time at which the connection is active. |
Was This Article Helpful?
Help us to improve our support portal