Network Security Management Administration Guide

Table of Contents

Topologies

The created VPN Topologies that can be used in NSM are displayed in the list.

To add VPN Topology

  1. Click Add to add new VPN Topology.
  2. There are 4 steps to add the topology. Click Next after each screen to add the topology.

The following section provides detailed information of each wizard -

  1. Basic Information
  2. Setup Security Association
  3. Setup Gateway
  4. Summary

To edit existing VPN Topology

  1. Navigate to Home | VPN > IPsec VPN Topology and select the item from the list.
  2. In the Action column, select Edit.
  3. Navigate through the screens and make the changes needed.
  4. Click Done.
  5. Verify that the changes appear in the table.