Wireless Network Manager Release Notes
Version 4.4.1
May 2024
Important
-
SonicWall Wireless Network Manager components must be registered on MySonicWall to enable full functionality and the benefits of Wireless Network Manager services, updates, and technical support. Log in or register for a MySonicWall account at https://mysonicwall.com.
-
Standard SonicWave access points include Secure WiFi wireless cloud and support services. Additional advanced wireless cloud and security subscription services, including Capture ATP, Content Filtering Service, Cloud Gateway Anti-Virus, and Geo-IP and Botnet Security Services are available for purchase separately at MySonicWall. After logging in, navigate to Product Management > My Products.
Compatibility and Installation Notes
The following compatibility and installation notes apply to this release of Wireless Network Manager.
Browser Requirements
For Wireless Network Manager use the latest browser with HTML5 support.
Supported SonicWave Access Points
Wireless Network Manager 4.4.1 is supported for the following SonicWall SonicWave wireless access points:
| SonicWave 200 Series | SonicWave 400 Series | SonicWave 600 Series |
|---|---|---|
|
|
|
The SonicWave access points require the following minimum SonicWave firmware build levels:
- For SonicWave 200 Series, the minimum build level is 9.2.4.9-6.
- For SonicWave 400 Series, the minimum build level is 9.1.4.9-6.
- For SonicWave 600 Series, the minimum build level is 9.6.4.9-6.
Supported SonicWall Switches
Wireless Network Manager 4.4.1 is supported for the following SonicWall Switches:
| Switch SWS12 Series | Switch SWS14 Series |
|---|---|
|
|
Switch management support requires SonicWall Switch firmware version 1.2.1.0-5 or later.
What's New
-
Monthly Scheduled Report - Ability to generate report every month, selecting the specific day of the month and timezone to generate a report.
-
Wireless Session Count in the Reports - Ability to count the use of each wireless access, regardless of the amount of time spent online.
-
Audit Log Default Priority Range - The visibility of default audit logs to the customer is changed from two to three.
Resolved Issues
| Issue ID | Issue Description |
|---|---|
| WSC-5335 | Wireless Network Managerhas Sync issue with MySonicWall, and throwing the error 500. |
| WSC-5295 | Wireless Network Manager does not update the email address for non-login logs. |
| WSC-5211 | The VLAN configuration updates are not shown in the logs. |
| WSC-5191 | The users with SAML have issues connecting with the Guest Portal. |
| WSC-5165 | The Wireless Network Manager and mysonicwave certificates on the Guest Portal Customized Splash page displays that the connection is not private with gstatic.com. |
| WSC-5089 | Audit log is not generated after Switch Policy->Ports Configurations are edited. |
| WSC-5041 | Log messages are not generated for Switch CLI. |
| WSC-5017 | The View List configuration is lost after adding a view with SUBTREE MASK LEVEL is not 1. |
| WSC-4963 | Audit log displays all the port configurations, even after some port POE options are edited. |
| WSC-4789 | Changes for the switch security policy L2 ACL Allow/Deny Mode is not synced to switch. |
| WSC-4783 | Device name shows none on the Logs page. |
Known Issues
| Issue ID | Issue Description |
|---|---|
| WSC-5330 | The Group for link aggregation can't be configured to switch, if 802.1x for same port is Auto configured. |
| WSC-5281 | The WNM Log does not display the SNMP policy edits done. |
Was This Article Helpful?
Help us to improve our support portal