Wireless Network Manager Release Notes
Version 4.3.2
December 2023
Important
- WiFi Cloud Manager (WCM) has been renamed to Wireless Network Manager.
-
SonicWall Wireless Network Manager components must be registered on MySonicWall to enable full functionality and the benefits of Wireless Network Manager services, updates, and technical support. Log in or register for a MySonicWall account at https://mysonicwall.com.
-
Standard SonicWave access points include Secure WiFi wireless cloud and support services. Additional advanced wireless cloud and security subscription services, including Capture ATP, Content Filtering Service, Cloud Gateway Anti-Virus, and Geo-IP and Botnet Security Services are available for purchase separately at MySonicWall. After logging in, navigate to Product Management > My Products.
Compatibility and Installation Notes
The following compatibility and installation notes apply to this release of Wireless Network Manager.
Browser Requirements
For Wireless Network Manager use the latest browser with HTML5 support.
Supported SonicWave Access Points
Wireless Network Manager 4.5 is supported for the following SonicWall SonicWave wireless access points:
| SonicWave 200 Series | SonicWave 400 Series | SonicWave 600 Series |
|---|---|---|
|
|
|
The SonicWave access points require the following minimum SonicWave firmware build levels:
- For SonicWave 200 Series, the minimum build level is 9.2.4.7-7.
- For SonicWave 400 Series, the minimum build level is 9.1.4.7-7.
- For SonicWave 600 Series, the minimum build level is 9.6.4.7-7.
Supported SonicWall Switches
Wireless Network Manager 4.5 is supported for the following SonicWall Switches:
| Switch SWS12 Series | Switch SWS14 Series |
|---|---|
|
|
Switch management support requires SonicWall Switch firmware version 1.2.0.2-6 or later.
What's New
-
A pop-up window has been added to notify users to change their account passwords. This pop-up is a reminder of the New Password criteria introduced in 4.3.1 WNM release.
The New Password Criteria (introduced in 4.3.1):
-
Password must be at least 10 characters long.
-
Password must be at least including a capital letter.
-
Password must be at least including a number.
-
Allowed characters are %-._~:/#[]@*
Switch will continue to communicate with Wireless Network Manager using existing passwords
Wireless Network Manager will prompt user to change password to meet new password criteria before pushing configuration update on switches.
-
Users can update passwords after logging in to Wireless Network Manager from Network> Devices >Switches >Configure >Switch Config>General Tab, or by updating the policy assigned to switch from the Policies >Switch Policies >Edit Switch Policy > Switch Config > General > User Management option.
Resolved Issues
| Issue ID | Issue Description |
|---|---|
| WSC-4715 | A switch port is accepting multiple VLAN memberships as untagged. |
Known Issues
| Issue ID | Issue Description |
|---|---|
| WSC-4885 | Switch policy - Admin/Password creates confusion for the users as getting error messages after adding a new user and password in the right format. |
| WSC-4864 | The Native VLAN in a port doesnot change automatically when adding or removing the port to or from untagged ports, by the graphical tool. |
Additional References
WSC-4871
Was This Article Helpful?
Help us to improve our support portal