Wireless Network Manager Release Notes
Version 4.5.1
October 2024
Important
-
SonicWall Wireless Network Manager components must be registered on MySonicWall to enable full functionality and the benefits of Wireless Network Manager services, updates, and technical support. Log in or register for a MySonicWall account at https://mysonicwall.com.
-
Standard SonicWave access points include Secure WiFi wireless cloud and support services. Additional advanced wireless cloud and security subscription services, including Capture ATP, Content Filtering Service, Cloud Gateway Anti-Virus, and Geo-IP and Botnet Security Services are available for purchase separately at MySonicWall. After logging in, navigate to Product Management > My Products.
Compatibility and Installation Notes
The following compatibility and installation notes apply to this release of Wireless Network Manager.
Browser Requirements
For Wireless Network Manager use the latest browser with HTML5 support.
Supported SonicWave Access Points
Wireless Network Manager 4.5.1 is supported for the following SonicWall SonicWave wireless access points:
| SonicWave 200 Series | SonicWave 400 Series | SonicWave 600 Series |
|---|---|---|
|
|
|
The SonicWave access points require the following minimum SonicWave firmware build levels:
- For SonicWave 200 Series, the minimum build level is 9.2.5.0-9.
- For SonicWave 400 Series, the minimum build level is 9.1.5.0-9.
- For SonicWave 600 Series, the minimum build level is 9.6.5.0-9.
Supported SonicWall Switches
Wireless Network Manager 4.5.1 is supported for the following SonicWall Switches:
| Switch SWS12 Series | Switch SWS14 Series |
|---|---|
|
|
Switch management support requires SonicWall Switch firmware version 1.3.0-3 or later.
What's New
-
This maintenance release provides the bug fixes for the previously reported issues.
Resolved Issues
| Issue ID | Issue Description |
|---|---|
| WSC-5753 | Some of the SonicWave APs shows the blue firmware upgrade icon but the upgrading does not work as required. |
| WSC-5737 | The position of the Inherited from Default Policy button in the Switch Policy > Port tab is incorrect. |
| WSC-5709 | Include wireless client IP address and summary in the WNM reports. |
| WSC-5705 | The Inheritance Off information is not accurate for the Switch Devices. |
| WSC-5704 | The WNM Log does not display the VLAN Object edits done. |
| WSC-5703 | The WNM Log does not display the Switch Port Policy edits done. |
| WSC-5696 | The AP/Switch status does not get updated unless the user update it manually on the Wireless Network Manager dashboard. |
Known Issues
| Issue ID | Issue Description |
|---|---|
| WSC-5757 | On the Device page, the SSLVPN Inherit DNS domain is not working, after the SSLVPN and DNS proxy with Bridge Mode are enabled for the AP. |
Additional References
WSC-5754, WSC-5751, WSC-5743, WSC-5734, WSC-5683
Was This Article Helpful?
Help us to improve our support portal