Switch Administration Guide
- Switch 1.3.0
- Product Overview
- Package Contents
- Technical Specifications
- Supported SonicWall and third-party SFP and SFP+ Modules
- Physical Interface - 8 Port Switch
- Physical Interface - 10 Port Switch
- Physical Interface - 24 Port Switch
- Physical Interface - 48 Port Switch
- Device Management
- Connecting the Switch to a Network
- Capacity Matrix
- System Management
- System
- Switching
- Routing
- Security
- VLAN
- Logging
- Diagnostics
- System Maintenance
- Switch Troubleshooting
- SonicWall Support
Bandwidth Control
The Bandwidth Control feature allows users to define the bandwidth settings for a specified port’s Ingress Rate Limit and Egress Rate.
Ingress |
Select to Enable or Disable ingress on the interface. |
Ingress Rate |
Enter the ingress rate in kilobits per second. The Gigabit Ethernet ports have a maximum speed of 1000000 kilobits per second. |
Egress |
Select from the drop down box to Enable or Disable egress on the interface . |
Egress Rate |
Enter the egress rate in kilobits per second. The Gigabit Ethernet ports have a maximum speed of 1000000 kilobits per second. |
Click Apply to save the changes to the system.
Was This Article Helpful?
Help us to improve our support portal