• Switch 1.2
• Product Overview
  • Technical Specifications
  • Supported SonicWall and third-party SFP and SFP+ Modules
  • Physical Interface - 8 Port Switch
  • Physical Interface - 10 Port Switch
  • Physical Interface - 24 Port Switch
  • Physical Interface - 48 Port Switch
  • Device Management
  • Connecting the Switch to a Network
  • Capacity Matrix
• System Management
  • System
    • Dashboard
    • Network
    • Administration
      • SSH Settings
    • System Information
    • User Management
    • Simple Network Management Protocol
      • Classic diagram of SonicWall Switch for SNMP Testing
      • Add View List
      • Add Target Params
      • Add Target Address
      • Add Notify Setting
      • SNMP Traps/Informs
      • How to configure SNMP on SonicWall Switch
      • SNMP supported OID’s in 1.2.0.1-2s
      • How to Configure SNMP/MIB Browser on Client PC
    • Address Resolution Protocol
      • ARP Table
      • ARP Statistics
    • Authentication
    • Firmware and Settings
    • DHCP Snooping
    • DHCP Relay
    • Time
  • Switching
    • Port Settings
      • Port Settings
        • Native VLAN
      • QoS Settings
        • Bandwidth Control
        • Storm Control
      • PoE
      • Security
        • 802.1X
      • ACL Binding
      • Advanced
    • Spanning Tree Protocol
      • Network Loops
      • Global Settings
      • MST Instance Settings
      • STP Port Statistics
    • Loopback Detection
    • Link Aggregation
      • Port Trunking
      • Link Aggregation Control Protocol Settings
      • Link Aggregation Control Protocol Timeout
    • Port Mirror
    • Jumbo Frames
    • MAC Address Table
      • Dynamic MAC Address
      • Search MAC Address
      • MAC Aging Time
    • Link Layer Discovery Protocol
      • Local Device
      • Remote Device
    • IGMP Snooping
      • Global Settings
      • Group List
      • Router Settings
    • Multicast Filtering
    • Quality of Service
      • Class of Service Mapping
      • IP/DSCP Mapping
      • Advanced Mode
        • Class Mapping
          • Adding a Class Policy
        • Policy Mapping
    • Remote Network Monitoring
      • Stat List
      • Event List
      • Event Log Table
      • Statistics
      • Alarm List
      • History List
      • History Log Table
    • Port Statistics
  • Routing
  • Security
    • 802.1X Security
      • MAC Authentication Bypass
        • Behaviors and Restrictions
      • Global Settings
      • Port Settings
      • Authenticated Host
      • Statistics
    • Denial of Service
    • ACL Management
      • MAC ACL
      • MAC-Based ACE
      • IPv4 ACL
      • IPv4-Based ACE
  • VLAN
    • 802.1Q
      • Configuring IGMP Snooping Settings
      • Configuring MLD Snooping Settings
      • Configuring DHCP Snooping Status
      • Configuring Access and Trunks using Standalone access
    • Voice VLAN
      • OUI Settings
      • Port Settings
  • Logging
    • Global Settings
      • Local Settings
    • Remote Logging
    • Log Table
  • Diagnostics
    • Ping
    • Trace Route
    • Tech Support Report
• System Maintenance
• Switch Troubleshooting
  • Communication flow between Firewall and Switch before it gets authenticated
• SonicWall Support
  • About This Document

ACL Management

Access Control List (ACL) allows you to define classification rules or establish criteria to provide security to your network by blocking unauthorized users and allowing authorized users to access specific areas or resources. ACLs can provide basic security for access to the network by controlling whether packets are forwarded or blocked at the Switch ports. ACLs are filters that allow you to classify data packets according to a particular content in the packet header, such as the source address, destination address, source port number, destination port number, and more. Packet classifiers identify flows for more efficient processing. Each filter defines the conditions that must match for inclusion in the filter. ACLs are used to provide traffic flow control, restrict contents of routing updates, and determine which types of traffic are forwarded or blocked. This criterion can be specified on a basis of the MAC address or IP address.