Switch Administration Guide
- Switch 1.2
- Product Overview
- System Management
- System
- Switching
- Routing
- Security
- VLAN
- Logging
- Diagnostics
- System Maintenance
- Switch Troubleshooting
- SonicWall Support
MAC-Based ACE
Allows MAC-Based Access Control Entry (ACE) to be defined within a configured ACL.
ACL Name |
Select the ACL from the list. |
Sequence |
Enter the sequence number which signifies the order of the specified ACL relative to other ACLs assigned to the selected interface. The valid range is from 1-2147483646, 1 being processed first. |
Action |
Select what action taken if a packet matches the criteria.
|
Destination MAC Value |
Enter the destination MAC address. |
Source MAC Value |
Enter the source MAC address. |
VLAN ID |
Enter the VLAN ID to which the MAC address is attached in MAC ACE. The range is from 1-4094. |
802.1p Value |
Enter the 802.1p value. The range is from 0-7. |
Ethertype Value |
Enter the Ethertype value. The range is from 0600-FFFF. |
Was This Article Helpful?
Help us to improve our support portal