Switch Administration Guide
- Switch 1.3.0
- Product Overview
- Package Contents
- Technical Specifications
- Supported SonicWall and third-party SFP and SFP+ Modules
- Physical Interface - 8 Port Switch
- Physical Interface - 10 Port Switch
- Physical Interface - 24 Port Switch
- Physical Interface - 48 Port Switch
- Device Management
- Connecting the Switch to a Network
- Capacity Matrix
- System Management
- System
- Switching
- Routing
- Security
- VLAN
- Logging
- Diagnostics
- System Maintenance
- Switch Troubleshooting
- SonicWall Support
ARP Table
The Switch maintains an ARP table which is comprised of mapped IP addresses and MAC addresses.
IP Address |
The IP address of the host to which the MAC address is assosiated. |
MAC Address | MAC address of the host. |
Interface | Displays the VLAN interface of the host. |
Mapping | Displays the mapping status as Dynamic or Static. |
To add an entry in the ARP Table
-
Click Add ARP above the table.
The Add ARP screen appears.
- In the Address field, enter the IP address of the host to which the MAC address is to be configured.
- In the MAC Address field, enter the MAC address of the host in the MAC address field.
- In the Interface drop-down, select the required VLAN interface.
- Click Apply to save the changes.
To delete an entry from the ARP Table
-
Click Configure on the entry to delete.
A Confirmation dialog appears.
- Click Confirm to delete the entry from the ARP table.
Was This Article Helpful?
Help us to improve our support portal