• SonicOSX 7 Profile Objects
• Endpoint Security
• Bandwidth
  • Understanding Bandwidth Profiles
  • Bandwidth Profiles
    • Configuring Bandwidth Object Settings
      • Elemental Bandwidth Object Settings
    • Configuring BWM on an Interface
    • Configuring BWM in a Security Rule Action
    • Editing Bandwidth Profiles
    • Deleting Bandwidth Profiles
• Block Page
  • Customizing Block Page Settings
  • Cloning Block Pages
  • Deleting Block Pages
• Log and Alerts
  • Adding Log and Alerts Profiles
    • About Event Profiles
  • Editing Log and Alert Profiles
  • Deleting Log and Alert Profiles
• Intrusion Prevention
  • Configuring Intrusion Prevention Profiles
  • Deleting Intrusion Prevention Profiles
• QoS Marking
  • Classification
  • Marking
  • Conditioning
    • Site to Site VPN over QoS Capable Networks
    • Site to Site VPN over Public Networks
  • 802.1p and DSCP QoS
    • Enabling 802.1p
    • DSCP Marking
      • DSCP Marking and Mixed VPN Traffic
      • Configure for 802.1p CoS 4 – Controlled Load
      • QoS Mapping
      • Managing QoS Marking
  • Configuring QoS Marking
• DHCP Option
  • Configuring DHCP Option Objects
    • RFC-Defined DHCPV4 Option Numbers
    • RFC-Defined DHCPV6 Option Numbers
  • Editing DHCP Option Objects
  • Deleting DHCP Option Objects
• AWS
  • AWS Objects
    • About Address Object Mapping with AWS
    • Viewing Instance Properties in SonicOSX
    • Creating a New Address Object Mapping
    • Enable Mapping
    • Configuring Synchronization
    • Configuring Regions to Monitor
    • Verifying AWS Address Objects and Groups
• SonicWall Support
  • About This Document

Deleting Intrusion Prevention Profiles

To delete custom Intrusion Prevention Profiles

1. Navigate to OBJECT | Profiles > Intrusion Prevention | Intrusion Prevention Profiles.

2. To delete custom profile(s), click the checkbox(es) in the left column for the Profile(s) you would like to remove.

3. Click Delete from the top toolbar.

4. A warning message appears. Click Confirm or Cancel.

   You cannot delete Default profiles.

To delete all custom Reporting Profiles

1. Navigate to OBJECT | Profiles > Intrusion Prevention | Intrusion Prevention Profiles.

2. Click the top checkbox in the left column.

   All custom Intrusion Prevention Profiles are selected.

3. Click Delete from the top toolbar.

4. A warning message appears. Click Confirm or Cancel.

   You cannot delete the Default profile.