• SonicOSX 7 Profile Objects
• Endpoint Security
• Bandwidth
  • Understanding Bandwidth Profiles
  • Bandwidth Profiles
    • Configuring Bandwidth Object Settings
      • Elemental Bandwidth Object Settings
    • Configuring BWM on an Interface
    • Configuring BWM in a Security Rule Action
    • Editing Bandwidth Profiles
    • Deleting Bandwidth Profiles
• Block Page
  • Customizing Block Page Settings
  • Cloning Block Pages
  • Deleting Block Pages
• Log and Alerts
  • Adding Log and Alerts Profiles
    • About Event Profiles
  • Editing Log and Alert Profiles
  • Deleting Log and Alert Profiles
• Intrusion Prevention
  • Configuring Intrusion Prevention Profiles
  • Deleting Intrusion Prevention Profiles
• QoS Marking
  • Classification
  • Marking
  • Conditioning
    • Site to Site VPN over QoS Capable Networks
    • Site to Site VPN over Public Networks
  • 802.1p and DSCP QoS
    • Enabling 802.1p
    • DSCP Marking
      • DSCP Marking and Mixed VPN Traffic
      • Configure for 802.1p CoS 4 – Controlled Load
      • QoS Mapping
      • Managing QoS Marking
  • Configuring QoS Marking
• DHCP Option
  • Configuring DHCP Option Objects
    • RFC-Defined DHCPV4 Option Numbers
    • RFC-Defined DHCPV6 Option Numbers
  • Editing DHCP Option Objects
  • Deleting DHCP Option Objects
• AWS
  • AWS Objects
    • About Address Object Mapping with AWS
    • Viewing Instance Properties in SonicOSX
    • Creating a New Address Object Mapping
    • Enable Mapping
    • Configuring Synchronization
    • Configuring Regions to Monitor
    • Verifying AWS Address Objects and Groups
• SonicWall Support
  • About This Document

Configuring DHCP Option Objects

You can create DHCP Option objects in one of these ways:

1. Navigate to Object > Profile Objects > DHCP Option page, and click Add to create IPv4 and IPv6 DHCP Option Objects. The Add DHCP Option Object dialog displays.

   

2. Type a name for the option object in the Option Name field.

3. From Option Number, select the option number that corresponds to your DHCP option. For a list of option numbers, names, and descriptions, refer to:

   • For IPv4, see RFC-Defined DHCPV4 Option Numbers
   • For IPv6, see RFC-Defined DHCPV6 Option Numbers

4. If:

   • Only one option type is available, for example, for Option Number 2 (Time Offset), Option Array is dimmed. Go to Step 7.

   • There are multiple option types available, for example, for 77 (User Class Information), Option Type becomes available and lists allowable types of the option, such as IP Address, Two-Byte Data, String, Boolean, and so on. Select the option type.

5. Type the option value, for example, an IP address, in the Option Value field. If Option Array is checked, multiple values may be entered, separated by a semi-colon (;).

6. Click OK. The object displays in the Option Objects table.

   DHCPv4 Option Objects table

   

   DHCPv6 Option Objects table

   

OR

• Navigate to Network > DHCP Server > DHCP Server Lease Scopes tab,

  • To create IPv4 Option object, click Add Static or Add Dynamic option. In the dialog, click Advanced tab and select Create New DHCP Option Object from the DHCP Generic Option Group drop-down.

    

  • To create IPv6 Option object, select IPv6 tab and click Add Static or Add Dynamic option. In the dialog, click Advanced tab and select Create New DHCP Option Object from the DHCP Generic Option drop-down.

    

• Follow Steps from 2 through Step 6 from the above section. The object displays in the Option Objects table.