• SonicOSX 7 Profile Objects
• Endpoint Security
• Bandwidth
  • Understanding Bandwidth Profiles
  • Bandwidth Profiles
    • Configuring Bandwidth Object Settings
      • Elemental Bandwidth Object Settings
    • Configuring BWM on an Interface
    • Configuring BWM in a Security Rule Action
    • Editing Bandwidth Profiles
    • Deleting Bandwidth Profiles
• Block Page
  • Customizing Block Page Settings
  • Cloning Block Pages
  • Deleting Block Pages
• Log and Alerts
  • Adding Log and Alerts Profiles
    • About Event Profiles
  • Editing Log and Alert Profiles
  • Deleting Log and Alert Profiles
• Intrusion Prevention
  • Configuring Intrusion Prevention Profiles
  • Deleting Intrusion Prevention Profiles
• QoS Marking
  • Classification
  • Marking
  • Conditioning
    • Site to Site VPN over QoS Capable Networks
    • Site to Site VPN over Public Networks
  • 802.1p and DSCP QoS
    • Enabling 802.1p
    • DSCP Marking
      • DSCP Marking and Mixed VPN Traffic
      • Configure for 802.1p CoS 4 – Controlled Load
      • QoS Mapping
      • Managing QoS Marking
  • Configuring QoS Marking
• DHCP Option
  • Configuring DHCP Option Objects
    • RFC-Defined DHCPV4 Option Numbers
    • RFC-Defined DHCPV6 Option Numbers
  • Editing DHCP Option Objects
  • Deleting DHCP Option Objects
• AWS
  • AWS Objects
    • About Address Object Mapping with AWS
    • Viewing Instance Properties in SonicOSX
    • Creating a New Address Object Mapping
    • Enable Mapping
    • Configuring Synchronization
    • Configuring Regions to Monitor
    • Verifying AWS Address Objects and Groups
• SonicWall Support
  • About This Document

Bandwidth Profiles

Bandwidth profiles are based on policies that specify bandwidth limitations for traffic classes. A complete bandwidth management policy consists of two parts: a classifier and a bandwidth rule.

A classifier specifies the actual parameters, such as priority, guaranteed bandwidth, and maximum bandwidth, and is configured in a bandwidth object. Classifiers identify and organize packets into traffic classes by matching specific criteria.

To configure a Bandwidth Profile

1. Navigate to OBJECT | Profiles > Bandwidth.

   The Bandwidth page appears.

   

• Configuring Bandwidth Object Settings

• Configuring BWM in a Security Rule Action
• Configuring BWM on an Interface