• SonicOSX 7
• Product Overview
  • Enterprise Class High-performance Firewall
  • Feature Summary
    • Simplified Management and Reporting
    • Advanced Threat Protection
    • Capture Cloud Platform
    • Deep Packet Inspection of SSL/TLS (DPI-SSL)
    • Content Filtering Service
    • Intrusion Prevention Service
    • Application Control
    • Unified Policy Configuration and Management
    • Multiple Instances / High Availability
  • System Architecture
  • Hardware Overview
    • Front Panel
    • Rear Panel
    • LEDs
    • Specifications
• System Setup
  • Default Settings
  • System Startup
    • HTTPS Management via X0
    • HTTPS Management via MGMT Port
      • Using SafeMode
      • Using CLI
  • SonicOSXBasic Configuration
  • Connecting LAN and WAN Interfaces
  • Network Configuration
  • Registration and Licensing
• Configuring Multiple Instances
  • Enabling Multi-Instances
  • Configuring Multi-Instances
• Licenses for Multiple Instances
  • Surveying Multiple Instances
  • Instance Registration
  • Instance License Update
  • Deactivating an Instance
  • Instance HA Pair on a Standalone NSsp Node
• Configuring High Availability
  • High Availability Overview
  • Setting Up Unit-to-Unit HA
  • Configuring Advanced Settings
  • Checking High Availability Status
  • Monitoring High Availability
  • Configuring Multi-Appliance Instance-Level HA
• CLI Bring-up
  • Access the Console Port
  • At the ChassisOS Prompt
  • To Change to the Console Port of Another Physical Blade
  • Check Network Address Settings
  • Commands at ChassisOS Prompt
  • Show Commands at ChassisOS Prompt
  • Configure IP Addresses from the CLI
  • Restart SonicOSX from the CLI
  • To Access SonicOSX Console
• Using the SafeMode GUI
  • Accessing SafeMode
  • Rebooting the System
  • Upgrading Firmware
  • Diagnostics
• SonicWall Support
  • About This Document

Configure IP Addresses from the CLI

Move back and forth to Configure Mode using configure and exit.

Configure IP Addresses

For a list of Configuration Mode commands, enter ?.

Of these, the most useful is network-mgmt. This allows changing the SonicOSX management, blade management and gateway IP addresses to conform to your network. Example syntax:

network mgmt IPv4 sonicos-IP 192.168.169.33 netmask 255.255.255.0 chassis-IP 192.168.169.3.

In the previous line, the TAB key can be used to generate the works identifying the IP addresses, while the addresses must be provided. All of the address are changed at once in this manner.

Immediately after reconfiguring management IP addresses, the services-mgmt command allows setting up safemode, ping, or ssh services, or all three.