• SonicOSX 7
• Product Overview
  • Enterprise Class High-performance Firewall
  • Feature Summary
    • Simplified Management and Reporting
    • Advanced Threat Protection
    • Capture Cloud Platform
    • Deep Packet Inspection of SSL/TLS (DPI-SSL)
    • Content Filtering Service
    • Intrusion Prevention Service
    • Application Control
    • Unified Policy Configuration and Management
    • Multiple Instances / High Availability
  • System Architecture
  • Hardware Overview
    • Front Panel
    • Rear Panel
    • LEDs
    • Specifications
• System Setup
  • Default Settings
  • System Startup
    • HTTPS Management via X0
    • HTTPS Management via MGMT Port
      • Using SafeMode
      • Using CLI
  • SonicOSXBasic Configuration
  • Connecting LAN and WAN Interfaces
  • Network Configuration
  • Registration and Licensing
• Configuring Multiple Instances
  • Enabling Multi-Instances
  • Configuring Multi-Instances
• Licenses for Multiple Instances
  • Surveying Multiple Instances
  • Instance Registration
  • Instance License Update
  • Deactivating an Instance
  • Instance HA Pair on a Standalone NSsp Node
• Configuring High Availability
  • High Availability Overview
  • Setting Up Unit-to-Unit HA
  • Configuring Advanced Settings
  • Checking High Availability Status
  • Monitoring High Availability
  • Configuring Multi-Appliance Instance-Level HA
• CLI Bring-up
  • Access the Console Port
  • At the ChassisOS Prompt
  • To Change to the Console Port of Another Physical Blade
  • Check Network Address Settings
  • Commands at ChassisOS Prompt
  • Show Commands at ChassisOS Prompt
  • Configure IP Addresses from the CLI
  • Restart SonicOSX from the CLI
  • To Access SonicOSX Console
• Using the SafeMode GUI
  • Accessing SafeMode
  • Rebooting the System
  • Upgrading Firmware
  • Diagnostics
• SonicWall Support
  • About This Document

Using CLI

From SSH, you can access the SonicOSX command line interface (CLI) for configuration and to view logs and settings. Log in with default SonicOSX credentials:

• Username: admin
• Default Password: password
• Your default password must be changed at first time while logging in after upgrade. Create a password that meets the security requirements. A password should have at least one uppercase letter, one lowercase letter, one number, and one special character. For example, S0nicW@ll.

  

• Perform the following steps to change password:
  1. In Please enter old password (or hit Enter to cancel):, enter your default password.
  2. In Please enter a new password (or hit Enter to cancel):, enter your new password.
  3. In Please re-enter new password, re-enter your new password.

For more on using the CLI, see section CLI Bring-up.