• SonicOS NSv 7
• Introducing the NSv Series
  • Feature Support Information
  • Node Counts Per Platform
  • Installation File / Supported Platforms
  • Hardware Compatibility
  • Product Matrix and Requirements
  • Backup and Recovery Information
  • High Availability Configurations
  • Exporting and Importing Firewall Configurations
  • Upgrading from SonicOS 6.5
  • Upgrading to a Higher Capacity NSv Model
  • Creating a MySonicWall Account
• Installing SonicOS on the NSv Series
  • Preparing the Windows Server System
  • Creating Virtual Switches in Hyper-V
  • Obtaining the NSv Image
  • To Install NSv on Hyper-V
  • Troubleshooting Installation Configuration
    • Insufficient Memory Assignment
    • Incompatible CPU
    • Incorrect CPU Configuration
    • Insufficient Resources at Time of Configuration
• Licensing and Registering Your NSv
  • Registering the NSv Virtual Machine with SonicOS
• SonicOS Management
  • Managing SonicOS on the NSv Series
  • Using System Diagnostics
• Using the Virtual Console and SafeMode
  • Connecting to the CLI and Management Console
  • Navigating the NSv Management Console
    • System Info
    • Management Network or Network Interfaces
    • Test Management Network
    • Diagnostics
    • NTP Server
    • Lockdown Mode
      • Temporary Lockdown Mode
    • System Update
    • Reboot | Shutdown
    • About
    • Logs
  • Using SafeMode on the NSv
    • Enabling SafeMode
    • Disabling SafeMode
    • Configuring the Management Network in SafeMode
      • Configuring Interface Settings
      • Disabling an Interface
    • Downloading Logs in SafeMode
  • Using the SafeMode Web Interface
    • Accessing the SafeMode Web Interface
    • Entering/Exiting SafeMode
    • Downloading the SafeMode Logs
    • Uploading a New Image in SafeMode
• SonicWall Support
  • About This Document

Registering the NSv Virtual Machine with SonicOS

After you have installed and configured the network settings for your NSv Series virtual machine, you can log into SonicOS management and register it in your MySonicWall account. Registration of your SonicWall NSv Series virtual machine follows the same process as for SonicWall hardware-based appliances.

System functionality is extremely limited when registration is not complete. See Using System Diagnostics for more information.

To register your NSv virtual machine

1. Point your browser to your NSv Series WAN or LAN IP address and log in as the administrator with default credentials.

   Ensure to use the new password if you have updated the default password.

2. Go to Dashboard | System > Summary and click Register Device.

   

3. At this point you can log into MySonicWall and name the NSv installation while providing the Firewall Serial Number and authorization code (Auth Code), and select a Policy Mode Switching option (Classic or Policy). Click Register to complete the registration.

   

   If you are unable to reach MySonicWall, use the Keyset, Serial Number, Auth Code, and Registration Code provided by your SonicWall representative in the Settings tab.

   

   Click Apply to complete the registration.

4. Log in to SonicOS and check that the licensing is enabled.