• SonicOS NSv 7
• Introducing the NSv Series
  • Feature Support Information
  • Node Counts Per Platform
  • Installation File / Supported Platforms
  • Hardware Compatibility
  • Product Matrix and Requirements
  • Backup and Recovery Information
  • High Availability Configurations
  • Exporting and Importing Firewall Configurations
  • Upgrading from SonicOS 6.5
  • Upgrading to a Higher Capacity NSv Model
  • Creating a MySonicWall Account
• Installing SonicOS on the NSv Series
  • Preparing the Windows Server System
  • Creating Virtual Switches in Hyper-V
  • Obtaining the NSv Image
  • To Install NSv on Hyper-V
  • Troubleshooting Installation Configuration
    • Insufficient Memory Assignment
    • Incompatible CPU
    • Incorrect CPU Configuration
    • Insufficient Resources at Time of Configuration
• Licensing and Registering Your NSv
  • Registering the NSv Virtual Machine with SonicOS
• SonicOS Management
  • Managing SonicOS on the NSv Series
  • Using System Diagnostics
• Using the Virtual Console and SafeMode
  • Connecting to the CLI and Management Console
  • Navigating the NSv Management Console
    • System Info
    • Management Network or Network Interfaces
    • Test Management Network
    • Diagnostics
    • NTP Server
    • Lockdown Mode
      • Temporary Lockdown Mode
    • System Update
    • Reboot | Shutdown
    • About
    • Logs
  • Using SafeMode on the NSv
    • Enabling SafeMode
    • Disabling SafeMode
    • Configuring the Management Network in SafeMode
      • Configuring Interface Settings
      • Disabling an Interface
    • Downloading Logs in SafeMode
  • Using the SafeMode Web Interface
    • Accessing the SafeMode Web Interface
    • Entering/Exiting SafeMode
    • Downloading the SafeMode Logs
    • Uploading a New Image in SafeMode
• SonicWall Support
  • About This Document

Enabling SafeMode

SafeMode can be enabled from the management console.

To enable SafeMode

1. Access the NSv management console as described in one of:

   • For NSv, see: Connecting to the Console with SSH

2. In the console, select the Reboot | Shutdown option and then press Enter.

3. Navigate down to the Boot SonicWall into safemode option to highlight Enable, and then press Enter.

   

4. Select Yes in the confirmation dialog.

5. Press Enter.

   The NSv immediately reboots and comes back up in SafeMode.

   In SafeMode, the web interface is served from an HTTP server. The HTTPS server is not started in SafeMode.