• SonicOS NSv 7
• Introducing the NSv Series
  • Feature Support Information
  • Product Matrix and Requirements
  • Backup and Recovery Information
  • Exporting and Importing Firewall Configurations
  • Github Repository
  • Upgrading from SonicOS 6.5
  • Upgrading to a Higher Capacity NSv Model
  • Creating a MySonicWall Account
• Installing SonicOS on the NSv Series
  • Supported NSv Models
  • Resizing NSv Virtual Machine
  • Task List for an NSv Virtual Machine Setup
  • Installing NSv on Azure
  • Accessing Your NSv in the Azure Portal
    • Updating Your Dashboard and Accessing the NSv Resource Group
    • Finding the Public IP Address of Your NSv
    • Logging into Your NSv for SonicOS Management
    • Viewing and Configuring Security Rules
  • Forwarding Traffic to Your NSv
  • Testing Traffic Through Your NSv
  • SonicWall NSv Firewall on Azure GovCloud
    • Installing NSv on Azure GovCloud
    • Installing Windows 10 from Console
    • Creating Address Objects
    • Configuring Security Profile
    • Applying Security Services on Policies in NSv for Outbound Traffic
    • Adding Static Routes
    • Creating a Security Policy and NAT Policy for Inbound RDP to the VM
  • Troubleshooting Installation Configuration
    • Insufficient Memory Assignment
• Licensing and Registering Your NSv
  • Registering the NSv Virtual Machine with SonicOS
• SonicOS Management
  • Managing SonicOS on the NSv Series
  • Using System Diagnostics
• Using the Virtual Console and SafeMode
  • Connecting to the Console with SSH
  • Navigating the NSv Management Console
    • System Info
    • Management Network or Network Interfaces
    • Test Management Network
    • Diagnostics
    • NTP Server
    • Lockdown Mode
      • Temporary Lockdown Mode
    • System Update
    • Reboot | Shutdown
    • About
    • Logs
  • Using SafeMode on the NSv
    • Enabling SafeMode
    • Disabling SafeMode
    • Configuring the Management Network in SafeMode
      • Configuring Interface Settings
      • Disabling an Interface
    • Installing a New SonicOS Version in SafeMode
    • Downloading Logs in SafeMode
• SonicWall Support
  • About This Document

Enabling SafeMode

SafeMode can be enabled from the management console.

To enable SafeMode

1. Access the NSv management console as described in one of:

   • For NSv, see: Connecting to the Console with SSH

2. In the console, select the Reboot | Shutdown option and then press Enter.

3. Navigate down to the Boot SonicWall into safemode option to highlight Enable, and then press Enter.

   

4. Select Yes in the confirmation dialog.

5. Press Enter.

   The NSv immediately reboots and comes back up in SafeMode.

   In SafeMode, the web interface is served from an HTTP server. The HTTPS server is not started in SafeMode.