SonicOS 8 Monitor

Protocol Monitor

The Monitor > Real Time Charts > Protocol Monitor page displays real-time charts showing ingress and egress traffic rates for the following protocols:

IPv4 Rate Internet Protocol version 4
ARP Rate Address Resolution Protocol, used by IPv4 to map IP network addresses to link layer hardware addresses
IPv6 Rate Internet Protocol version 6
UDP Rate User Datagram Protocol, a connection-less protocol used for example by DNS, SNMP, RIP, DHCP
TCP Rate Transmission Control Protocol, a connection oriented protocol allowing bidirectional traffic once the connection is established, used for example by FTP, SSH, Telnet, and also by DNS
ICMP Rate Internet Control Message Protocol, used by network devices to send error messages and operational information; ping uses ICMP to send echo request packets to a host
IGMP Rate Internet Group Management Protocol, used by hosts and routers to establish multicast group memberships

The seven real-time charts displayed on the Protocol Monitor page are shown in the images below. The Ingres rate is displayed on the top half of each chart, and the Egress rate is displayed on the bottom.

A chart may be empty or blank if there are no recent data entries received within the viewing range.

Protocol Monitor - IPV4 Chart

Protocol Monitor - ARP Chart

Protocol Monitor - IPv6 Chart

Protocol Monitor - UDP Chart

Protocol Monitor - TCP Chart

Protocol Monitor - ICMP Chart

Protocol Monitor - IGMP Chart

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden