You can view the connections that have been associated with SD-WAN Rules on the Monitor | SDWAN > SD-WAN Connections page.
SRC MAC | MAC address of the appliance that is the source of the connection. |
SRC VENDOR | Name of the vendor of the appliance that is the source of the connection. |
SRC IP | IP address of the appliance that is the source of the connection. |
SRC PORT | Port on the appliance that is the source of the connection. |
DST MAC | MAC address of the appliance that is the destination of the connection. |
DST VENDOR | Name of the vendor of the appliance that is the destination of the connection. |
DST IP | IP address of the appliance that is the destination of the connection. |
DST PORT | Port on the appliance that is the destination of the connection. |
PROTOCOL | Protocol used for the connection. |
SRC IFACE | Interface on the appliance that is the source of the connection. |
DST IFACE | Interface on the appliance that is the destination of the connection. |
SRC ROUTE | Source route of the connection. |
DST ROUTE | Destination route of the connection. |
FLOW TYPE | Type of data flow control, such as FTP Control. |
IPS CATEGORY | Internet Provider Security (IPS) category. If this information is not available or relevant, the column displays N/A. |
ABR APP ID | App-Based Routing Application ID. |
ABR CATEGORY ID | App-Based Routing Category ID. |
EXPIRY (SEC) | Number of seconds until the connection expires. |
TX BYTES | Number of bytes transmitted on the connection. |
RX BYTES | Number of bytes received on the connection. |
TX PKTS | Number of packets transmitted on the connection. |
Rx PKTS | Number of packets received on the connection. |
Flush | Displays the Flush icon. Clicking the icon flushes the connection. |
Total | Total number of entries on the page. This is displayed at the bottom of the page. |
You can perform the following actions on the page: