SonicOS 7 System

Technical Documentation > SonicOS 7 System > Interfaces > Interface Settings IPv4 > Layer 2 Bridged Mode > Configuring Network Interfaces and Activating L2B Mode > Configuring or Verifying Settings

Configuring or Verifying Settings

From a management station inside your network, you should now be able to access the management interface on the appliance using its WAN IP address.

To configure or verify settings

  1. Ensure that all security services for the appliance are enabled. See Licensing Services and Activating Security Services on Each Zone.
  2. SonicWall Content Filtering Service must be disabled before the device is deployed in conjunction with a SonicWall SMA SSL VPN appliance.
    1. Navigate to OBJECT | Match Objects > Zones page.
    2. Click Configure next to the LAN (X0) zone.
    3. Clear Enforce Content Filtering Service.
    4. Click OK.
  3. If you have not yet changed the administrative password on the appliance, you can do so on DEVICE | Settings > Administration.
  4. To test access to your network from an external client, connect to the SSL VPN appliance and log in.
  5. When connected, attempt to access to your internal network resources. If there are any problems, review your configuration and see Configuring the Common Settings for L2 Bridged Mode Deployments.

Was This Article Helpful?

Help us to improve our support portal

Yes! Not Really

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden