SonicOS 7.1 SD-WAN
Adding an SD-WAN SLA Class Object
To add a SLA Class Object
- Navigate to Network | SDWAN > SLA Class Objects.
- Click the Add icon.
The Add SLA Class Object dialog appears.
- Enter a meaningful name in the Name field.
-
Enable Include Latency to include the SLA class latency attribute for this object to exclude the latency attribute. This option is selected by default.
-
If Include Latency is enabled, enter the acceptable latency, in milliseconds, in the Latency (ms) field. The minimum is 0 milliseconds, the maximum is 1000 milliseconds, and the default is 0 milliseconds.
-
Enable Include Jitter to include the SLA class jitter attribute for this object to exclude the jitter attribute. This option is selected by default.
-
If Include Jitter is enabled, enter the acceptable jitter, in milliseconds, in the Jitter (ms) field. The minimum is 0 milliseconds, the maximum is 1000 milliseconds, and the default is 0 milliseconds.
-
Enable Include Loss to include the SLA class packet loss attribute for this object to exclude the packet loss attribute. This option is selected by default.
-
If Include Loss is enabled, enter the acceptable percentage of packet loss in the Loss (%) field. The minimum is 0, the maximum is 100, and the default is 0.
- You cannot exclude all three attributes (Latency, Jitter, Packet Loss) in the same object.
- You can view the SLA Probe section to see what you are getting on each link to determine practical thresholds.
- Optionally, enter a comment in the Comment field.
- Click OK.
Was This Article Helpful?
Help us to improve our support portal