SonicOS 7.1 SD-WAN
Viewing SD-WAN Rules Connections
You can view the connections that have been associated with SD-WAN Rules on the Monitor | SDWAN > SD-WAN Connections page.
- To view the activities associated with IPv4 SD-WAN Rules, click IPv4 tab.
- To view the activities associated with IPv6 SD-WAN Rules, click IPv6 tab.
| SRC MAC | MAC address of the appliance that is the source of the connection. |
| SRC VENDOR | Name of the vendor of the appliance that is the source of the connection. |
| SRC IP | IP address of the appliance that is the source of the connection. |
| SRC PORT | Port on the appliance that is the source of the connection. |
| DST MAC | MAC address of the appliance that is the destination of the connection. |
| DST VENDOR | Name of the vendor of the appliance that is the destination of the connection. |
| DST IP | IP address of the appliance that is the destination of the connection. |
| DST PORT | Port on the appliance that is the destination of the connection. |
| PROTOCOL | Protocol used for the connection. |
| SRC IFACE | Interface on the appliance that is the source of the connection. |
| DST IFACE | Interface on the appliance that is the destination of the connection. |
| SRC ROUTE | Source route of the connection. |
| DST ROUTE | Destination route of the connection. |
| FLOW TYPE | Type of data flow control, such as FTP Control. |
| IPS CATEGORY | Internet Provider Security (IPS) category. If this information is not available or relevant, the column displays N/A. |
| ABR APP ID | App-Based Routing Application ID. |
| ABR CATEGORY ID | App-Based Routing Category ID. |
| EXPIRY (SEC) | Number of seconds until the connection expires. |
| TX BYTES | Number of bytes transmitted on the connection. |
| RX BYTES | Number of bytes received on the connection. |
| TX PKTS | Number of packets transmitted on the connection. |
| Rx PKTS | Number of packets received on the connection. |
| Flush | Displays the Flush icon. Clicking the icon flushes the connection. |
| Total | Total number of entries on the page. This is displayed at the bottom of the page. |
You can perform the following actions on the page:
- To search a log, enter a keyword related to an activity in the Search bar
- To filter the logs, click Filter icon, select the appropriate filter options, and then click APPLY FILTERS.
- To clear the filters applied, click Clear Filter icon
- To export the logs in CSV or TEXT files, click Export icon and select the required format
- To refresh the page, click Refresh icon
Was This Article Helpful?
Help us to improve our support portal