SonicOS 7.1 SD-WAN
About SD-WAN Rules
SD-WAN Rules bring Path Selection Profiles and routing criteria together to provide dynamic path selection. SD-WAN Rules combine a Path Selection Profile with either a Source and/or Destination and/or Service Object/Group or a specific Match Object of type "Application List" or "Application Category List" which determines the outgoing path dynamically based on the Path Selection Profile's parameters. If there is more than one path qualified by the Path Selection Profile, the traffic is automatically load balanced among the qualified paths. If none of the paths are qualified by the Path Selection Profile and the backup interface in the profile is not configured or is down, the rule is disabled.
SD-WAN Rules can also be configured or viewed from the Policy | Rules and Policies > Routing Rules page. The Network | SDWAN > Rules page, however, only shows the SD-WAN Rules and only allows configuration of SD-WAN-type rules.
| NAME | Name of the SD-WAN Rules. |
| IP VERSION | The IP version is shown by an icon showing whether the rule is for IPv4 and/or IPv6. |
| SOURCE | Source address object for the SD-WAN Rule. |
| DESTINATION | Destination address object for the SD-WAN Rule. |
| SERVICE | Service object for the for the SD-WAN Rule. If App was selected instead of Service for the type of rule, N/A appears. |
| APP |
Application match object for the for the SD-WAN Rule. If Service was selected instead of App for the type of rule, N/A appears ."Application List" or "Application Category List" Match Objects used here are created at Object | Match Objects > Match Objects. |
| TOS/Mask | Hexadecimal TOS and TOS Mask. If these options were not configured, you will see this field as blank. |
| PATH PROFILE | Path Selection Profile for the SD-WAN Rule. |
| INTERFACE | SD-WAN interface group associated with the SD-WAN Rule. |
| METRIC | Metric used for the SD-WAN Rule. |
| PRIORITY | Priority of the rule in Routing Rules route table. |
| COMMENT | When you hover over the comment icon, the comment entered when the SD-WAN Rule was configured is displayed. |
Was This Article Helpful?
Help us to improve our support portal