SFR Email Settings

To automatically send your SonicFlow Report (SFR) to an Email address

1. Navigate to DEVICE | Appflow > Flow Reporting.
2. Click the SFR Mailing tab.
3. Select Send Report by E-mail.

4. Enter these options:

   • The address of the email server in the SMTP Server Host Name field.
   • The recipient’s email address in the E-mail To field.
   • The email address used for the sender in the From E-mail field.
   • The SMTP port number in the SMTP Port field. The default value is 25.
   • A security method for the email from the Connection Security Method drop‐down menu:
     • None (default)
     • SSL/TLS
     • STARTTLS

5. If your email server requires SMTP authentication, select Enable SMTP Authentication and enter these options:

   • User name in the SMTP User Name field.
   • Password in the SMTP User Password field.

6. If your email server supports POP Before SMTP authentication, you can select POP Before SMTP and enter these options:

   • Address of the POP server in the POP Server Address field.
   • User name in the POP User Name field.
   • Password in the POP User Password field.
7. Click Accept.

To test the Email settings

1. Enter the required values in the SFR Email Settings.

2. Click Test Email.

   If the Email settings are correct, a confirmation dialog box is displayed.

   If the Email settings are incorrect, a warning dialog box is displayed:

   You need to verify the Email settings and try again.