• SonicOS 7.0 Rules and Policies
• Settings
  • Configuring App/Match/Malware
  • Configuring Content Filtering Service (CFS)
    • SonicWall CFS
    • CFS Custom Category
  • Geo-IP
    • Custom List
      • Editing a Custom List Entry
      • Deleting Custom List Entries
    • Using Geo-IP Diagnostics
  • Botnet
    • Configuring Botnet Settings
    • Creating Custom Botnet Lists
    • Viewing Dynamic Botnets Lists
    • Configuring a Dynamic Botnet List Server
    • Using Botnet Diagnostics
  • Decryption (DPI-SSL)
    • Certificate
    • Common Name
    • SSL Servers
  • Decryption (DPI-SSH)
  • Signature Update
• Security Policy
  • User & Country
  • App/URL/Custom Match
• NAT Policy
  • About NAT in SonicOS
  • About NAT Load Balancing
    • Determining the NAT LB Method to Use
    • Caveats
    • How Load Balancing Algorithms are Applied
    • Sticky IP Algorithm Examples
      • Example One - Mapping to a Network
      • Example Two - Mapping to an IP Address Range
  • About NAT64
    • Use of Pref64::/n
  • About FQDN-based NAT
  • About Source MAC Address Override
  • Viewing NAT Policy Entries
    • Changing the Display
    • Filtering the Display
  • Adding or Editing NAT or NAT64 Rule Policies
  • Deleting NAT Policies
  • Creating NAT Rule Policies: Examples
    • Creating a One-to-One NAT Policy for Inbound Traffic
    • Creating a One-to-One NAT Policy for Outbound Traffic
    • Inbound Port Address Translation via One-to-One NAT Policy
    • Inbound Port Address Translation via WAN IP Address
    • Creating a Many-to-One NAT Policy
    • Creating a Many-to-Many NAT Policy
    • Creating a NAT Load Balancing Policy for Two Web Servers
• Routing
  • About Routing
    • About Metrics and Administrative Distance
      • About Metrics
      • About Administrative Distance
    • Route Advertisement
    • ECMP Routing
    • Policy-based Routing
    • Policy-based TOS Routing
    • PBR Metric-based Priority
    • Policy-based Routing and IPv6
    • OSPF and RIP Advanced Routing Services
      • About Routing Services
        • Protocol Type
        • Maximum Hops
        • Split-Horizon
        • Poison Reverse
        • Routing Table Updates
        • Subnet Sizes Supported
        • Autonomous System Topologies
      • OSPF Terms
    • Drop Tunnel Interface
    • App-based Routing
  • Rules and Policies > Route Policy
    • Configuring Route Policies
      • Adding Static Routes
      • Probe-Enabled Policy-based Routing Configuration
• Decryption Policy
  • Client-side SSL Rules
  • Server-side SSL Rules
  • SSH Rules
  • Setting up the Decryption Policy Table
    • Managing the Decryption Policy Toolbars
    • Changing the Policy Priority
    • Creating Decryption Policies
      • Adding Decryption Policies
      • Editing Decryption Policies
      • Deleting Decryption Policies
• DoS Policy
  • Setting up the DoS Policy Table
    • Managing the DoS Policy Toolbars
    • Changing the DoS Policy Priority
    • Creating DoS Policies
      • Adding DoS Policies
      • Editing DoS Policies
      • Deleting DoS Policies
• DNS Policy
  • Creating DNS Policies
    • Adding DNS Policies
    • Editing DNS Policies
    • Deleting DNS Policies
  • DNS Doctoring
• Endpoint Policy
• Shadow
• SonicWall Support
  • About This Document

Configuring a Dynamic Botnet List Server

With SonicOS, username and passwords for HTTP URLs in the dynamic Botnet configuration are accepted, and the information is transmitted in the HTTP header so the network security appliance has the required information.

To configure dynamic HTTP authentication

1. Navigate to POLICY | Rules and Policies > Settings > Botnet > Dynamic Botnet List.
2. Select Enable botnet list download periodically. This option is not selected by default.

3. From Download Interval, select the frequency of downloads:

   • 5 minutes (default)
   • 15 minutes
   • 1 hour
   • 24 hours

The network security appliance downloads the Botnet file from the server at the specified interval.

1. From Protocol, select the protocol in which the firewall has to communicate with the backend server to retrieve the file:

   • FTP (default)
   • HTTPS
2. In the Server IP Address field, enter the IP address of the server to which the Botnet list file will be downloaded.
3. In the Login ID field, enter the login ID the network security appliance is to use to connect to the server.
4. In the Password field, enter the password the network security appliance is to use to connect to the server.
5. In the Directory Path field, enter the directory path the firewall from which the network security appliance retrieves the Botnet file. This server directory path is relative to the default root directory.
6. In the File Name field, enter the name of the file on the server to be downloaded .
7. Click Accept.