• SonicOS 7.0 Rules and Policies
• Settings
  • Configuring App/Match/Malware
  • Configuring Content Filtering Service (CFS)
    • SonicWall CFS
    • CFS Custom Category
  • Geo-IP
    • Custom List
      • Editing a Custom List Entry
      • Deleting Custom List Entries
    • Using Geo-IP Diagnostics
  • Botnet
    • Configuring Botnet Settings
    • Creating Custom Botnet Lists
    • Viewing Dynamic Botnets Lists
    • Configuring a Dynamic Botnet List Server
    • Using Botnet Diagnostics
  • Decryption (DPI-SSL)
    • Certificate
    • Common Name
    • SSL Servers
  • Decryption (DPI-SSH)
  • Signature Update
• Security Policy
  • User & Country
  • App/URL/Custom Match
• NAT Policy
  • About NAT in SonicOS
  • About NAT Load Balancing
    • Determining the NAT LB Method to Use
    • Caveats
    • How Load Balancing Algorithms are Applied
    • Sticky IP Algorithm Examples
      • Example One - Mapping to a Network
      • Example Two - Mapping to an IP Address Range
  • About NAT64
    • Use of Pref64::/n
  • About FQDN-based NAT
  • About Source MAC Address Override
  • Viewing NAT Policy Entries
    • Changing the Display
    • Filtering the Display
  • Adding or Editing NAT or NAT64 Rule Policies
  • Deleting NAT Policies
  • Creating NAT Rule Policies: Examples
    • Creating a One-to-One NAT Policy for Inbound Traffic
    • Creating a One-to-One NAT Policy for Outbound Traffic
    • Inbound Port Address Translation via One-to-One NAT Policy
    • Inbound Port Address Translation via WAN IP Address
    • Creating a Many-to-One NAT Policy
    • Creating a Many-to-Many NAT Policy
    • Creating a NAT Load Balancing Policy for Two Web Servers
• Routing
  • About Routing
    • About Metrics and Administrative Distance
      • About Metrics
      • About Administrative Distance
    • Route Advertisement
    • ECMP Routing
    • Policy-based Routing
    • Policy-based TOS Routing
    • PBR Metric-based Priority
    • Policy-based Routing and IPv6
    • OSPF and RIP Advanced Routing Services
      • About Routing Services
        • Protocol Type
        • Maximum Hops
        • Split-Horizon
        • Poison Reverse
        • Routing Table Updates
        • Subnet Sizes Supported
        • Autonomous System Topologies
      • OSPF Terms
    • Drop Tunnel Interface
    • App-based Routing
  • Rules and Policies > Route Policy
    • Configuring Route Policies
      • Adding Static Routes
      • Probe-Enabled Policy-based Routing Configuration
• Decryption Policy
  • Client-side SSL Rules
  • Server-side SSL Rules
  • SSH Rules
  • Setting up the Decryption Policy Table
    • Managing the Decryption Policy Toolbars
    • Changing the Policy Priority
    • Creating Decryption Policies
      • Adding Decryption Policies
      • Editing Decryption Policies
      • Deleting Decryption Policies
• DoS Policy
  • Setting up the DoS Policy Table
    • Managing the DoS Policy Toolbars
    • Changing the DoS Policy Priority
    • Creating DoS Policies
      • Adding DoS Policies
      • Editing DoS Policies
      • Deleting DoS Policies
• DNS Policy
  • Creating DNS Policies
    • Adding DNS Policies
    • Editing DNS Policies
    • Deleting DNS Policies
  • DNS Doctoring
• Endpoint Policy
• Shadow
• SonicWall Support
  • About This Document

Drop Tunnel Interface

A drop tunnel interface prevents traffic from being sent out using an incorrect route when the configured route is down. Traffic sent to a drop tunnel interface does not leave the appliance, but is ostensibly dropped.

A drop tunnel interface should be used in conjunction with a VPN tunnel interface, although a drop tunnel interface can be used standalone. If a static route is bound to a tunnel interface, SonicWall recommends configuring a static route bound to a drop tunnel interface for the same network traffic. That way, if the tunnel interface goes down, the second static route is used and the traffic is effectively dropped. This prevents the data from being forwarded in the clear over another route.

When configuring a route over a VPN tunnel interface, if the tunnel is temporarily down, the corresponding route entry is disabled as well. SonicOS looks up a new route entry for the connections destined for the VPN protected network. In deployments that do not have a backup link for a remote VPN network, no other correct route entry is available. Traffic is sent to a wrong route entry, generally the default route, which causes security issues such as internal data sent without encryption.

For deployments without a backup link, consider configuring the route table as in this example:

route n:   local VPN network(source), remote VPN network(destination), VPN TI(egress_if)

route n+1: local VPN network(source), remote VPN network(destination), Drop If(egress_if)

When the VPN tunnel interface configured as in this example, the traffic matches the drop interface and is not sent out. When the VPN tunnel interface resumes, traffic resumes also.