SonicOS 7.0.1 Release Notes

Download PDF
Technical Documentation > SonicOS 7.0.1 Release Notes > SonicWall SonicOS 7.0.1 > Version 7.0.1-5072 June 2022

Version 7.0.1-5072 June 2022

June 2022

This version of SonicOS7.0.1 (7.0.1-5072) is a maintenance release for currently shipping NSsp 15700 platform and resolves issues found in previous releases.

Supported Platforms

This release applies only to the NSsp 15700 platform.

For information about the release related to other platforms, please see Version 7.0.1-5065 April 2022.

Resolved Issues

Issue ID Issue Description
GEN7-28720 The Application Bandwidth Monitor may not report the full set of statistics.
GEN7-29262 Traffic may fail to pass through the VPN tunnel interface for tunnel VPN policies established on non-master blades when the VPN is bound to a VLAN and parent interface of the VLAN is unassigned.
GEN7-29777 The web management interface may refresh very slowly when the User Group page contains more than 2800 user groups.
GEN7-30009 The Security Policies page may display No Data briefly when loading more than 600 entries.
GEN7-30412 On the Users Status page, the Inactivity Remaining column may not display properly on the Users list.
GEN7-30459 On LDAP User Import page, only the first LDAP Group displays any users when user groups are read from the LDAP Server.
GEN7-30599 Unnecessary warning of the lock gBkupTaskMutex is displayed on console for tRemoteBackupd.
GEN7-30786 In the web management interface, administrators cannot browse through the full list of NAT policies.
GEN7-30787 Users are displayed as being inactive when traffic sourced from a user IP is crossing the network security appliance when SSO agent, TSA, or NTLM are enabled.
GEN7-30789 A crash may be encountered on the primary network security appliance after disabling High Availability because of attempting to synchronize an SSO failure report to the master blade.
GEN7-31032 The error Cannot read property 'id' of undefined displays when adding a custom match object.
GEN7-31138 After a stateful High Availability failover, traffic may be interrupted for more than 10 seconds due to G-ARP not being captured on the client host system.
GEN7-31262 The Content Filtering Service (CFS) server is not reachable from a standby unit in a High Availability pair because the request was not using the monitoring IP address of its related interface.
GEN7-31289 In a High Availability pair, the secondary unit may reboot due to settings becoming unsynchronized after clearing packet capture.
GEN7-31388 In a High Availability configuration, and both Primary and Secondary Chassis IPs are configured, when the Primary firewall is removed from the High Availability mode, an error about IP overlap is displayed after pressing OK on the management interface settings screen.
GEN7-31425 In a High Availability configuration, with IPHelper enabled and the resolution set to DNS then NetBios, a Failover can eventually occur on the primary device, but remain stable on the secondary device.
GEN7-31625 In a High Availability configuration, the primary unit's VLAN interface MAC address of a static LAG pair is being published also from the secondary unit's secondary LAG interface into the directly connected switch port, displaying an error during setup: evpn duplicate mac dampening detected.
GEN7-31636 The Real-Time Monitor on the System Monitor tab may display gaps in the graphs of Multicore Monitor.
GEN7-31803 SonicOS shuts down and reboots due to a segmentation fault.
GEN7-31805 Stateful Synchronization requires 40 minutes to be ready after the Control Interface is unplugged or plugged in, resulting from the retransmission of High Availability settings synchronization having too many duplicate synchronization packets
GEN7-31835 Enabling packet capture on the primary unit in a High Availability pair may trigger a segmentation fault and the secondary unit becomes stuck in High Availability synchronization mode even though the primary unit was rebooting.
GEN7-31931 In a High Availability configuration, the primary device may reboot while synchronizing the DHCP binding.
GEN7-32023 Using packet capture or diagnostic tools on the primary unit in a High Availability pair triggers a synchronization of the settings.
GEN7-32032 Importing settings may cause a lock issue on the Policy table.
GEN7-32163 Some decryption policies are missing, and the order of the policies is changed, upon failover from a primary unit to a secondary unit in a High Availability pair.
GEN7-32540 A crash may be seen with a stacktrace for DP-engine-0 in a High Availability Pair causing failover when running a heavy load of mixed traffic, UDP traffic, and OSPF routes when DPI-SSL Decryption Policies and Bandwidth Management are configured.
GEN7-32620 A crash may be seen with a stacktrace for delayedLog.c in a High Availability Pair causing failover when running a heavy load of mixed traffic, UDP traffic, and OSPF routes when DPI-SSL Decrytion Policies and Bandwidth Management are configured.

Additional References

The following additional resolved issues in this release are listed here for reference:

GEN7-32314, GEN7-32297, GEN7-32215, GEN7-32192, GEN7-31905, GEN7-31849, GEN7-31297, GEN7-31272, GEN7-30337, GEN7-30082, GEN7-30054, GEN7-29178

Known Issues

Issue ID Issue Description
GEN7-31899 The configurations on the DOS policy page cannot be audited.
GEN7-32179 Guest Accounts with a custom guest profile do not inherit its settings.
GEN7-32261 OSPFv3/RIPng cannot be established over trunked VLAN or sub-VLAN interfaces.

Was This Article Helpful?

Help us to improve our support portal

Yes! Not Really

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden