SonicOS 7.0.1 Release Notes
- SonicWall SonicOS 7.0.1
- Version 7.0.1-5161 July 2024
- Version 7.0.1-5151 March 2024
- Version 7.0.1-5145 November 2023
- Version 7.0.1-5129 June 2023
- Version 7.0.1-5119 June 2023
- Version 7.0.1-5111 April 2023
- Version 7.0.1-5100 March 2023
- Version 7.0.1-5095 November 2022
- Version 7.0.1-5083 September 2022
- Version 7.0.1-5080 September 2022
- Version 7.0.1-5072 June 2022
- Version 7.0.1-5030-R945 May 2022
- Version 7.0.1-5065 April 2022
- Version 7.0.1-5054 April 2022
- Version 7.0.1-5052 April 2022
- Version 7.0.1-5030 December/October 2021
- Version 7.0.1-5026 September 2021
- Version 7.0.1-5023 August 2021
- Version 7.0.1-5019 August 2021
- Version 7.0.1 July 2021
- Version 7.0.1 June 2021
- Version 7.0.1 April 2021
- SonicWall Support
Version 7.0.1-5065 April 2022
April 2022
This version of SonicOS 7.0.1 is a maintenance release for existing platforms and resolves issues found in previous releases.
Supported Platforms
The platform-specific versions for this unified release are all the same:
Platform | Firmware Version |
---|---|
TZ Series | 7.0.1-5065 |
NSa Series | 7.0.1-5065 |
NSv Series | 7.0.1-5065 |
NSsp Series | 7.0.1-5065 |
|
|
|
|
SonicOS NSv deployments are supported on the following platforms:
- AWS (BYOL and PAYG)
- Microsoft Azure (BYOL)
- VMware ESXi
- Microsoft Hyper-V
- Linux KVM
Resolved Issues
Issue ID | Issue Description |
---|---|
GEN7-19015 | Cannot connect to Layer Two Tunneling Protocol (L2TP) with packets dropped as the packet does not match traffic selectors if the L2TP clients are behind a network address translation (NAT) IP address assignment. |
GEN7-19520 | An error may be displayed when accessing the Topology view when a large number of client systems are connected. |
GEN7-24141 | New devices may not be acquired by Network Security Manager (NSM) that have settings for VoIP are imported from an older (pre-2020) device. |
GEN7-26188 | The LED for LAN bypass does not work as expected. |
GEN7-26488 | Native Bridge Mode Pair causes IP traffic drops from and between the paired VLAN interfaces and causes the firewall web management interface to become inaccessible. |
GEN7-26726 | Purge option to delete log files from storage cannot be selected if two or more files are selected. |
GEN7-28690 | In a High Availability configuration, a reboot may be seen due to a segmentation fault
in DP-engine-1 . |
GEN7-28776 | The Virtual Office Bookmark tab is not visible when a MGMT-Only privilege is added to the SSLVPN Services group by adding a group, enabling Members go straight to the management UI on web login, and then removing the new group. |
GEN7-28888 | An SNMP query fails over a site-to-site VPN when network address translation (NAT) is enabled. |
GEN7-29012 | When using external storage, the system logs file location changes from secondary storage to primary storage after the network security appliance is rebooted. |
GEN7-29058 | A wildcard FQDN object will not resolve subdomains unless a www FQDN object is also created. |
GEN7-29162 | When using migrated settings, the Path Selection Profile interface status displays Not Qualified for SD-WAN Group interfaces when using the default SLA class object. |
GEN7-29210 | Unable to add 10 GB SFP+ interfaces for Port Mirroring. |
GEN7-29376 | SonicWall Switches managed using a network security appliance and connected on a Trunk port are not receiving a DHCP IP address from its native Interface. |
GEN7-29535 | Console prints tTimerTask stacktrace about every 1 hour. There is no functional effect. |
GEN7-29547 | Slow response times may be experienced when accessing a RDP session using a Virtual Office bookmark. |
GEN7-29552 | Unbinding the Time-based one-time password (TOTP) key from the User Login Status page did not work if the user password does not meet the complexity constraints. |
GEN7-29603 | A WAN Group VPN shared secret is displayed incorrectly when administering the network security appliance using Network Security Manager (NSM). |
GEN7-29650 | When trying to set up Quota limit for Radius or LDAP users, the message script is missing one or more "exit" commands may be displayed. |
GEN7-29853 | Settings are not saved when importing LDAP users and assigning the user quota on the Import page. |
GEN7-29867 | Trying to add an All Deny access rule on the WAN > WAN page maybe display the error Rule Blocks Management Rule(s). |
GEN7-29872 | Server DPI-SSL, the error message The server is not sending intermediate certificate may be displayed. |
GEN7-29904 | The Test LED is not blinking on the Standby unit in a High Availability pair. |
GEN7-29990 | The RDP SSL VPN Virtual Office bookmark setting Automatically login, Use SSL-VPN account credentials has been removed due to security concerns. |
GEN7-30015 | TCP traffic fails to pass through the WAN zone native bridge interfaces when the destination IP address is not in the same subnet with the client system. |
GEN7-30040 | Allocation of resources without limits or throttling can potentially result in HTTP DoS via the Content Filtering Service (CFS). |
GEN7-30063 | When a Guest user is included in a group membership of "Guest Administrator": The message Auto- Generate password" feature for isn't working according to the assigned Guest profile may be displayed. When trying to export the user list, the button does not work. When using the Print icon, the password is not displayed on the paper. |
GEN7-30334 | When saving the configuration of an LDAP user in Local Users & Groups, the message script is missing one or more "exit" command might be displayed. |
GEN7-30418 | Not able to change the Default target IP under WAN failover and Load
balancing Probe settings if using 0.0.0.0 . |
GEN7-30590 | Importing settings fail and trigger a trace indicating a post file HTTP issue through the API. |
GEN7-30620 | The VPN category is missing from the Category list in Application Control when trying enable a block for the VPN category. |
GEN7-30681 | The packet monitor settings on the standby firewall display the primary configuration instead of the runtime configuration. |
GEN7-30698 | The Local User display can be very slow to refresh. Searching for local users causes the Local Users interface to become unresponsive when a large number of configured users are present. |
GEN7-30716 | When importing settings for High Availability, the error Failed to create cloned ifList is displayed because of a synchronization issue . |
GEN7-30743 | The network security appliance may reboot when a command-line interface (CLI) stage was destroyed unexpectedly while accessing data. |
GEN7-31049 | When the Trusted Relay Agent Check is enabled, the Global VPN Client (GVC) client may become unresponsive in Acquiring IP status and the firewall fails to offer DHCP IP addresses. |
GEN7-31069 | The SNMP Manager may be unable to get responses from an idle firewall in a High Availability pair over a VPN. |
GEN7-31215 | The Suppress Automatic Access Rules Creation for a VPN Policy is not available. |
GEN7-31244 | When trying to create decryption policy using an LDAP imported group, the error Cannot read properties of undefined (reading 'success') is displayed. |
GEN7-31260 | The network security appliance may reboot when TSR is pulled on units in High Availability. |
GEN7-31313 | In WAN Load Balancing, the default gateway cannot be used as the default target
IP address when all targets are set to 0.0.0.0 . |
GEN7-31334 | Log files stored on external storage cannot be deleted. |
GEN7-31358 | NSA 6700 only: The LACP configuration fails on the 40GB Interface (X33). |
GEN7-31361 | Unable to add or edit an WLAN interface when Only allow traffic generated by a SonicPoint/SonicWave is disabled. The error Command 'no auto-discovery' does not match is displayed. |
GEN7-31420 | When the rendering of the BGP neighbor status exceeds approximately 32k bytes, the Settings page does not display correctly. |
GEN7-31746 | Enabling Mirror LDAP user groups locally does not display the imported mirrored groups. |
GEN7-31987 | Potential exposure of Wireless Access Point (WAP) sensitive information via SNMP. |
GEN7-31988 | Potential exposure of sensitive information to an unauthorized user via SNMP. |
GEN7-32041 | When AppFlow is enabled, CP core usage will spike and many fields report that CP core CPU usage remains at 100% for an extended period of time. |
GEN7-32225 | The OpenSSL library can enter an infinite loop when parsing an invalid certificate, potentially resulting in Denial-of-Service (DoS). |
Additional References
The following additional resolved issues in this release are listed here for reference:
GEN7-19015, GEN7-19520, GEN7-24141, GEN7-26188, GEN7-26488, GEN7-26726, GEN7-28690, GEN7-28776, GEN7-28888, GEN7-29012, GEN7-29058, GEN7-29162, GEN7-29210, GEN7-29376, GEN7-29535, GEN7-29547, GEN7-29552, GEN7-29603, GEN7-29650, GEN7-29853, GEN7-29867, GEN7-29872, GEN7-29904, GEN7-29990, GEN7-30015, GEN7-30040, GEN7-30063, GEN7-30334, GEN7-30418, GEN7-30590, GEN7-30620, GEN7-30681, GEN7-30698, GEN7-30716, GEN7-30743, GEN7-31049, GEN7-31069, GEN7-31215, GEN7-31244, GEN7-31260, GEN7-31313, GEN7-31334, GEN7-31358, GEN7-31361, GEN7-31420, GEN7-31746, GEN7-32041
Known Issues
Issue ID | Issue Description |
---|---|
GEN7-31588 | On the Device > Log > Settings page the toggle buttons to disable or apply to all categories whether a log is sent to a given resource does not work as expected. |
GEN7-31724 | When using a custom authentication partition, it displays a user in the Unauthenticated Users list. If the partition is disabled or using the default authentication partition, it displays the user on the Active Users list. |
GEN7-31820 | Link Aggregation Control Protocol (LACP) does not function as expected on interfaces above X32. |
GEN7-31926 | A SonicWall Switch becomes unreachable after its DHCP lease expires when added to a Dedicated Uplink topology. |
GEN7-32258 | When the MSSP license is expired, the network security appliance always prompts that the system needs to restart. |
GEN7-32311 | DPI-SSL does not works properly when an interface is in Layer 2 bridge mode and when the Never route traffic on this bridge-pair option is disabled. |
GEN7-32411 | Network Security Manager (NSM) reports that the network security appliance is unregistered in MSSP mode, even when appliance is registered. |
GEN7-32602 | DNS packets may be dropped when UDP Flood Protection is running. |
GEN7-32696 | As an administrator, closing the aggregator port in a L2 Link Aggregation Group (LAG) which uses DHCP causes traffic to fail to pass through.A |
Was This Article Helpful?
Help us to improve our support portal