• SonicOS and SonicOSX 7 IPSec VPN
• IPSec VPN Overview
  • About Virtual Private Networks
  • VPN Types
    • IPsec VPN
    • DHCP over VPN
    • L2TP with IPsec
    • SSL VPN
  • VPN Security
    • About IKEv1
    • About IKEv2
    • Mobility and Multi-homing Protocol for IKEv2 (MOBIKE)
    • About IPsec (Phase 2) Proposal
    • About Suite B Cryptography
  • VPN Base Settings and Displays
    • Policies
    • Active Tunnels
    • Settings
  • IPv6 VPN Configuration
• Site to Site VPNs
  • Planning Site to Site Configurations
  • General VPN Configuration
    • Configuring Settings on the General Tab
    • Configuring Settings on the Network Tab
    • Configuring Settings on the Proposals Tab
    • Configuring Settings on the Advanced Tab
  • Managing GroupVPN Policies
    • Configuring IKE Using a Preshared Secret Key
    • Configuring IKE Using 3rd Party Certificates
    • Downloading a GroupVPN Client Policy
  • Creating Site to Site VPN Policies
    • Configuring with a Preshared Secret Key
    • Configuring with a Manual Key
    • Configuring with a Third-Party Certificate
    • Configuring the Remote SonicWall Network Security Appliance
    • Configuring VPN Failover to a Static Route
• VPN Auto Provisioning
  • About VPN Auto Provisioning
    • Defining VPN Auto Provisioning
    • Benefits of VPN Auto Provisioning
    • How VPN Auto Provisioning Works
      • About Establishing the IKE Phase 1 Security Association
      • About Establishing IKE Phase 2 using a Provisioned Policy
  • Configuring a VPN AP Server
    • Starting the VPN AP Server Configuration
    • Configuring VPN AP Server Settings on General
    • Configuring VPN AP Server Settings on Network
    • Configuring Advanced Settings on Proposals
    • Configuring Advanced Settings on Advanced
  • Configuring a VPN AP Client
• Rules and Settings
  • Adding a Tunnel Interface
    • Creating a Static Route for the Tunnel Interface
  • Route Entries for Different Network Segments
  • Redundant Static Routes for a Network
• Advanced
  • Configuring Advanced VPN Settings
  • Configuring IKEv2 Settings
  • Using OCSP with SonicWall Network Security Appliances
    • OpenCA OCSP Responder
    • Loading Certificates to Use with OCSP
    • Using OCSP with VPN Policies
• DHCP over VPN
  • DHCP Relay Mode
  • Configuring the Central Gateway for DHCP Over VPN
  • Configuring DHCP over VPN Remote Gateway
  • Current DHCP over VPN Leases
• L2TP Servers and VPN Client Access
  • Configuring the L2TP Server
  • Viewing Currently Active L2TP Sessions
  • Configuring Microsoft Windows L2TP VPN Client Access
  • Configuring Google Android L2TP VPN Client Access
• AWS VPN
  • Overview
  • Creating a New VPN Connection
  • Reviewing the VPN Connection
    • Configuration on the Firewall
    • Configuration on Amazon Web Services
  • Route Propagation
  • AWS Regions
  • Deleting VPN Connections
• SonicWall Support
  • About This Document

Configuring VPN Failover to a Static Route

You can configure a static route as a secondary route in case the VPN tunnel goes down. When defining the route policies, the Allow VPN path to take precedence option allows you to create a secondary route for a VPN tunnel and gives precedence to VPN traffic having the same destination address object. This results in the following behavior:

• When a VPN tunnel is active: static routes matching the destination address object of the VPN tunnel are automatically disabled if the Allow VPN path to take precedence option is enabled. All traffic is routed over the VPN tunnel to the destination address object.
• When a VPN tunnel goes down: static routes matching the destination address object of the VPN tunnel are automatically enabled. All traffic to the destination address object is routed over the static routes.

To configure a static route as a VPN failover

1. Navigate to POLICY | Rules and Policies > Routing Rules.

2. Click + Add.

   

3. Type a descriptive name for the policy into the Name field.

   Type up to three Tags to help you locate your policy rule. Use commas as separators.

4. Select the appropriate Source, Destination, Service, Gateway, and Interface.

5. Define Metric as 1.

6. Select Allow VPN path to take precedence.

7. Click Save.