• SonicOS and SonicOSX 7 IPSec VPN
• IPSec VPN Overview
  • About Virtual Private Networks
  • VPN Types
    • IPsec VPN
    • DHCP over VPN
    • L2TP with IPsec
    • SSL VPN
  • VPN Security
    • About IKEv1
    • About IKEv2
    • Mobility and Multi-homing Protocol for IKEv2 (MOBIKE)
    • About IPsec (Phase 2) Proposal
    • About Suite B Cryptography
  • VPN Base Settings and Displays
    • Policies
    • Active Tunnels
    • Settings
  • IPv6 VPN Configuration
• Site to Site VPNs
  • Planning Site to Site Configurations
  • General VPN Configuration
    • Configuring Settings on the General Tab
    • Configuring Settings on the Network Tab
    • Configuring Settings on the Proposals Tab
    • Configuring Settings on the Advanced Tab
  • Managing GroupVPN Policies
    • Configuring IKE Using a Preshared Secret Key
    • Configuring IKE Using 3rd Party Certificates
    • Downloading a GroupVPN Client Policy
  • Creating Site to Site VPN Policies
    • Configuring with a Preshared Secret Key
    • Configuring with a Manual Key
    • Configuring with a Third-Party Certificate
    • Configuring the Remote SonicWall Network Security Appliance
    • Configuring VPN Failover to a Static Route
• VPN Auto Provisioning
  • About VPN Auto Provisioning
    • Defining VPN Auto Provisioning
    • Benefits of VPN Auto Provisioning
    • How VPN Auto Provisioning Works
      • About Establishing the IKE Phase 1 Security Association
      • About Establishing IKE Phase 2 using a Provisioned Policy
  • Configuring a VPN AP Server
    • Starting the VPN AP Server Configuration
    • Configuring VPN AP Server Settings on General
    • Configuring VPN AP Server Settings on Network
    • Configuring Advanced Settings on Proposals
    • Configuring Advanced Settings on Advanced
  • Configuring a VPN AP Client
• Rules and Settings
  • Adding a Tunnel Interface
    • Creating a Static Route for the Tunnel Interface
  • Route Entries for Different Network Segments
  • Redundant Static Routes for a Network
• Advanced
  • Configuring Advanced VPN Settings
  • Configuring IKEv2 Settings
  • Using OCSP with SonicWall Network Security Appliances
    • OpenCA OCSP Responder
    • Loading Certificates to Use with OCSP
    • Using OCSP with VPN Policies
• DHCP over VPN
  • DHCP Relay Mode
  • Configuring the Central Gateway for DHCP Over VPN
  • Configuring DHCP over VPN Remote Gateway
  • Current DHCP over VPN Leases
• L2TP Servers and VPN Client Access
  • Configuring the L2TP Server
  • Viewing Currently Active L2TP Sessions
  • Configuring Microsoft Windows L2TP VPN Client Access
  • Configuring Google Android L2TP VPN Client Access
• AWS VPN
  • Overview
  • Creating a New VPN Connection
  • Reviewing the VPN Connection
    • Configuration on the Firewall
    • Configuration on Amazon Web Services
  • Route Propagation
  • AWS Regions
  • Deleting VPN Connections
• SonicWall Support
  • About This Document

About Establishing the IKE Phase 1 Security Association

Because the goal of the VPN AP Client is ease of use, many IKE and IPsec parameters are defaulted or auto-negotiated. The VPN AP Client initiates Security Association establishment, but does not know the configuration of the VPN AP Server at initiation.

To allow IKE Phase 1 to be established, the set of possible choices is restricted; the VPN AP Client proposes multiple transforms (combined security parameters) from which the VPN AP Server can select its configured values. A Phase 1 transform contains the following parameters:

• Authentication – One of the following:
  • PRESHRD – Uses the preshared secret.
  • RSA_SIG – Use an X.509 certificate.
  • SW_DEFAULT_PSK – Uses the Default Provisioning Key.
  • XAUTH_INIT_PRESHARED – Uses the preshared secret combined with XAUTH user credentials.
  • XAUTH_INIT_RSA – Uses an X.509 certificate combined with XAUTH user credentials.

  • SW_XAUTH_DEFAULT_PSK – Uses the Default Provisioning Key combined with XAUTH user credentials.

  All the previously mentioned transforms contain the restricted or default values for the Phase 1 proposal settings:

  • Exchange - Aggressive Mode
  • Encryption – AES-256
  • Hash – SHA1
  • DH Group – Diffie-Hellman Group 5
  • Life Time (seconds) – 28800

The VPN AP Server responds by selecting a single transform from those contained in the VPN AP Client proposal. If the VPN AP Server selects a transform which uses an XAUTH Authentication Method, the VPN AP Client awaits an XAUTH challenge following Phase 1 completion. If a non-XAUTH transform is chosen, the provisioning phase begins. The VPN AP Server provisions the VPN AP Client with the appropriate policy values including the Shared Secret, if one was configured on the VPN AP Server, and the VPN AP Client ID that was configured on the VPN AP Server.

After the Phase 1 SA is established and policy provisioning has completed, the Destination Networks appear in the VPN Policies section of the NETWORK | IPSec VPN > Rules and Settings page.