SonicOS 7 Getting Started for the TZ Series
- SonicOS 7
- Package Contents
- Front Panel
- Back Panel
- Mounting Options
- Determining the WAN Type
- System Requirements
- Connectivity and Power
- Setup Options
- Running the Setup Wizard
- Testing and Troubleshooting Connectivity
- Registering a TZ Appliance
- Configuring TZ Wireless LAN Settings
- Uploading the Latest Firmware
- Enabling PoE on the Appliance
- SonicWall Support
Front Panel
|
||
|
U0 | U0 Port: USB 3.0 SuperSpeed (SS) Port for WWAN |
|
SS
|
USB SS 3.0 Port: For Configuration, Recovery, Re-imaging the TZ |
|
|
Power LEDs: 1 = Primary, 2 = Redundant Blue = Powered on, Yellow = Defective adapter |
|
|
Test LED: Yellow = Initializing, Blinking Yellow = SafeMode |
|
|
Security LED: Green = All Security Services Licensed, Blinking Yellow = Security Services License Expired Security Services monitored by this LED: Gateway Anti-Virus, Intrusion Prevention, Anti-Spyware |
|
|
Storage LED: Solid Green = Extended Storage module present, Blinking Green = Activity, Yellow = Storage warning |
|
|
Wireless W0 WLAN LED (TZ570W only): Solid Green = Wireless radio is active, Blinking Green = Activity |
|
XO | LAN/MGMT X0 Port LED: Solid Green = 1G link, Blinking Green = 1G activity |
|---|---|---|
|
X1/X2 | WAN X1 and X2 Port LEDs: Solid Green = 1G link, Blinking Green = 1G activity |
|
X0-X7 | |
|
X8-X9 | |
|
|
U0 WWAN LEDs for USB 5G/LTE: Green = 5G/LTE signal strength |
Was This Article Helpful?
Help us to improve our support portal