Connectivity and Power

Connect Interfaces

• Connect the TZ WAN interface (X1 or X2) to the Internet connection using a standard Ethernet cable.
• Connect the LAN interface (X0) to your computer using a standard Ethernet cable.

• Connect the antennas to the appliance.

The center antenna is labeled and is only compatible with the center antenna connector.

Connect Power

• Connect the power adapter to the appliance and to the power cable. Plug the power cable into an appropriate outlet (100-240 volts AC).

• The TZ appliance powers on, and the Test LED lights up during the boot sequence and then turns off when the boot sequence is complete.

Use only the power adapter included with this appliance. Do not use a power adapter that is damaged or from another appliance.