Secure Mobile Access 12.4 Deployment Guide
- Secure Mobile Access
- About this Guide
- About SonicWall Secure Mobile Access
- Planning Your VPN
- Common VPN Configurations
- About the Configurations
- Deployment Scenario: Remote Access for Employees and Partners
- Customizing WorkPlace
- Testing the Deployment Scenario
- Other Remote Access VPN Scenarios
- Additional Partner VPN Scenarios
- End Point Control Scenarios
- Access Policy Scenarios
- Application-Specific Scenarios
- Authentication Scenarios
- Access Component Provisioning
- SonicWall Support
Configuring End Point Control for Employees
Configure the Employees community to use the zone of trust you configured in Creating a Device Zone for Trusted Users. (The conditions you set in a real deployment will of course be different—this is just a demonstration of how EPC works.)
To specify the Trusted zone for Employees
-
Navigate to the End Point Control Restrictions tab on Configure Community page.
-
In the Device zones list, select the checkbox next to
Trusted
. -
Click the checkbox at the top of the list to add it to the In use list.
-
Under Zone fallback options, select Place into quarantine zone and then select
Untrusted
from the drop-down menu. -
Click Next to select WorkPlace appearance settings for employees. Go to Configuring the WorkPlace Appearance for Employees.
Was This Article Helpful?
Help us to improve our support portal