• Secure Mobile Access 10.2
• Introduction
• Before You Begin
  • Supported Platforms
  • Requirements
  • Files for Installation
  • Creating a MySonicWall Account
• Installing the SMA 500v for ESXi Virtual Appliance
  • Downloading the SMA 500v for ESXi Virtual Appliance Software
  • Installing SMA 500v for ESXi
• Configuring the SMA 500v for ESXi Virtual Appliance
  • Powering the Virtual Appliance On or Off
  • Using the Command Line Interface
    • Setup Wizard
    • Reboot
    • Restart SSL VPN Services
    • Logout
    • Save TSR to Flash
    • Display EULA
  • Configuring Settings on the Appliance Web Interface
• Licensing and Registering Your Appliance
  • Registering the SMA 500v for ESXi
• Using the 30-day Trial Version
  • Deployment Considerations
  • Registering the 30-day Trial Virtual
  • Converting a Free Trial License to Full
• Upgrading Your Appliance
  • Obtaining the Latest Image Version
  • Exporting a Copy of Your Configuration
  • Uploading a New Image
• SonicWall Support
  • About This Document

Requirements

The following are the minimum requirements for the SMA 500v for ESXi:

• 4 GB RAM

  This is the minimum amount of RAM needed by the SMA 500v for ESXi operating system to meet the product performance and capacity specifications. A smaller amount of RAM can be configured, but is not recommended.

• 2 CPU

  This is the default number of CPUs provisioned in the SMA 500v for ESXi. The minimum required number of CPUs is 1.

• 32 GB Hard Disk space
• Internet access (for communication between the and the SonicWall Licensing Manager)