• Secure Mobile Access 10.2
• Introduction
• Before You Begin
  • Supported Platforms
  • Requirements
  • Files for Installation
  • Creating a MySonicWall Account
• Installing the SMA 500v for ESXi Virtual Appliance
  • Downloading the SMA 500v for ESXi Virtual Appliance Software
  • Installing SMA 500v for ESXi
• Configuring the SMA 500v for ESXi Virtual Appliance
  • Powering the Virtual Appliance On or Off
  • Using the Command Line Interface
    • Setup Wizard
    • Reboot
    • Restart SSL VPN Services
    • Logout
    • Save TSR to Flash
    • Display EULA
  • Configuring Settings on the Appliance Web Interface
• Licensing and Registering Your Appliance
  • Registering the SMA 500v for ESXi
• Using the 30-day Trial Version
  • Deployment Considerations
  • Registering the 30-day Trial Virtual
  • Converting a Free Trial License to Full
• Upgrading Your Appliance
  • Obtaining the Latest Image Version
  • Exporting a Copy of Your Configuration
  • Uploading a New Image
• SonicWall Support
  • About This Document

Powering the Virtual Appliance On or Off

There are multiple ways to power the SMA 500v for ESXi on or off:

• Right-click the SMA 500v for ESXi in the left pane and navigate to Power > Power On or Power > Power Off in the right-click menu.
• Select the SonicWall SMA 500v for ESXi Virtual Appliance in the left pane and then click Power on the virtual machine or Shut down the virtual machine on the Getting Started view in the right pane.
• Select the SonicWall SMA 500v for ESXi Virtual Appliance in the left pane and then click Power On or Shut down guest in the Summary view in the right pane.