Creating Dynamic Device Groups

To create a new static device group

1. Log into the Capture Client Management Console.
2. In the Scope Selector, select the appropriate tenant in which you want to create a group.
3. Navigate to Assets > Groups.
4. Click + at the upper-right corner of table.

5. Type the Group Name in the field provided.

   

6. Select Group Category as Dynamic and Group Type as Device Group .
7. Click Next.

8. In the ADD DEVICES/RULES page, you can add rule (s) for the device group being created.

   You can add multiple rules for a group if needed.

   These are the criteria available for creation of a rule:

   • Device ID
   • Device Name
   • Device Type
   • Hardware Model
   • Processor Type
   • OS Name
   • OS Type
   • OS Version
   • Public IP
   • Console Visible IP
   • Local IP
   • MAC Address
   • Capture Client Version
   • Computer Distinguished Name
   • Last User Distinguished Name
   • ActiveDirectory Group for Computer
   • ActiveDirectory Group for Computer
   • Current Country
   • Current City

   

9. Review the summary of the device group being created and select the Assignment Mode.

   You have options to Edit, Remove, or Add rules on this page.

10. click Confirm.

    To review the policies associated with the group, click Take me to policies . You can also configure the custom policies for the group, see Creating Custom Policies for Device Groups. Otherwise go to step 11.

    

11. Click Done.