• SonicOS/X NSv 7
• Introducing the NSv Series
  • Feature Support Information
  • Product Matrix and Requirements
  • Backup and Recovery Information
  • Exporting and Importing Firewall Configurations
  • Github Repository
  • Upgrading from SonicOS 6.5
  • Upgrading to a Higher Capacity NSv Model
  • Creating a MySonicWall Account
• Installing SonicOS/X on the NSv Series
  • Supported NSv Models
  • Task List for an NSv Virtual Machine Setup
  • Installing NSv on Azure
  • Accessing Your NSv in the Azure Portal
    • Updating Your Dashboard and Accessing the NSv Resource Group
    • Finding the Public IP Address of Your NSv
    • Logging into Your NSv for SonicOS/X Management
    • Viewing and Configuring Security Rules
  • Forwarding Traffic to Your NSv
  • Testing Traffic Through Your NSv
  • Troubleshooting Installation Configuration
    • Insufficient Memory Assignment
• Licensing and Registering Your NSv
  • Registering the NSv Virtual Machine with SonicOS/X
• SonicOS/X Management
  • Managing SonicOS/X on the NSv Series
  • Using System Diagnostics
• Using the Virtual Console and SafeMode
  • Connecting to the Console with SSH
  • Navigating the NSv Management Console
    • System Info
    • Management Network or Network Interfaces
    • Test Management Network
    • Diagnostics
    • NTP Server
    • Lockdown Mode
      • Temporary Lockdown Mode
    • System Update
    • Reboot | Shutdown
    • About
    • Logs
  • Using SafeMode on the NSv
    • Enabling SafeMode
    • Disabling SafeMode
    • Configuring the Management Network in SafeMode
      • Configuring Interface Settings
      • Disabling an Interface
    • Installing a New SonicOS/X Version in SafeMode
    • Downloading Logs in SafeMode
• SonicWall Support
  • About This Document

Disabling an Interface

You can disable an interface while in SafeMode.

To disable an interface

1. In the SafeMode Management Network screen, select the Management interface option.

2. Press Enter.

   The Select Interface list appears, displaying all of the interfaces available on the NSv.

3. Select the interface you wish to edit and press Enter.

   The IPv4 and IPv6 addresses, Netmask, MAC address, Gateway, and DNS settings are displayed previously on the interface selection dialog.

4. Select IPv4 Address and press Enter.

   The onscreen dialog displays the current IP address.

5. Navigate into the dialog and change the IP address to 0.0.0.0, then press Enter.

   

   Save changes displays.

6. Press Tab to navigate to Save changes and then press Enter.

   The interface is disabled.