• SonicOS 7.0
• About Firewall
  • Firewall Workflow
• Advanced
  • Changing Between SonicOS
    • Changing From Classic to Policy Mode
    • Changing From Policy to Classic Mode
  • Detection Prevention
  • Dynamic Ports
  • Source Routed Packets
  • Internal VLAN
  • Access Rule Options
  • IP and UDP Checksum Enforcement
  • Jumbo Frame
  • Connections
  • Control Plane Flood Protection
  • IPv6 Advanced Configuration
  • TCP
    • TCP Settings
    • Layer 3 SYN Flood Protection- SYN Proxy
    • Layer 2 SYN/RST/FIN Flood Protection - MAC Blacklisting
    • WAN DDOS Protection (Non-TCP Floods)
    • TCP Traffic Statistics
  • UDP
    • UDP Settings
    • UDP Flood Protection
    • UDP Traffic Statistics
    • UDPV6 Traffic Statistics
  • ICMP
    • ICMP Flood Protection for IPv4 version
    • ICMP Traffic Statistics
    • ICMP Flood Protection for IPv6 version
    • ICMPv6 Traffic Statistics
• Flood Protection
• SSL Control
  • Key Features of SSL Control
  • Key Concepts to SSL Control
  • Caveats and Advisories
  • Configuring SSL Control
  • Custom List
  • Enabling SSL Control on Zones
  • SSL Control Events
• Cipher Control
  • TLS Ciphers
    • Blocking/Unblocking Ciphers
    • Filtering Ciphers
      • Selecting Display Options
      • Displaying Ciphers by Strength
      • Displaying Ciphers by Block/Unblock
      • Displaying Ciphers by CBC Mode
      • Displaying Ciphers by TLS Protocol Version
  • SSH Ciphers
• Real-Time Black List (RBL) Filter
  • Configuring the RBL Filter
    • Enabling RBL Blocking
    • Adding RBL Services
    • Configuring User-Defined SMTP Server Lists
      • Configuring a White List
      • Configuring a Black List
    • Testing SMTP IP Addresses

About Firewall

The Firewall section allows you to perform the following:

• Configure the advanced firewall settings to do the following:

  • Selection of or changing between Classic and Policy modes for NSv series, which provides a unified policy configuration workflow combining Layer 2 to Layer 7 policy enforcement for security policies and optimizing the workflow for other policy types.

  • Configure Detection and prevention in order to prevent threats, and detect them in real time.

  • Configure the dynamic port numbers using the internet's Transmission Control Protocol (TCP) or the User Datagram Protocol (UDP).

  • Configure IP Source Routing allows the sender of a packet to specify which route the packet should take on the way to its destination.

  • Configure the access rule options to control the flow of inbound and outbound Internet traffic from the local network to the public Internet. Both routers and firewalls use access rules to control traffic and verify the source and destination addresses are permitted to send and receive traffic on the local network.

  • Configure the IP and UDP Checksum Enforcement to check a simple error-detection scheme in which each transmitted message that results in a numerical value based on the value of the bytes in a message. and to determine the integrity of the data transmitted over a network respectively.

  • Configure the Control Plan Flood Protection to prevent too much data traffic from reaching the Control Plane core, which can cause slow system response and potential network connection drops. The percentage configured for control traffic is guaranteed.

  • Configure various IPv6 advanced configurations.

• Manage TCP, UDP and ICMP flood protection and view the traffic statistics through the security appliance.

  • Transmission Control Protocol (TCP) is used for organizing data in a way that ensures the secure transmission between the server and client. It guarantees the integrity of data sent over the network, regardless of the amount. For this reason, it is used to transmit data from other higher-level protocols that require all transmitted data to arrive.

  • User datagram protocol (UDP) operates on top of the Internet Protocol (IP) to transmit datagrams over a network. UDP does not require the source and destination to establish a three-way handshake before transmission takes place. Additionally, there is no need for an end-to-end connection.

  • Internet Control Message Protocol (ICMP) is used by a device, like a router, to communicate with the source of a data packet about transmission issues. For example, if a datagram is not delivered, ICMP might report this back to the host with details to help discern where the transmission went wrong.

• Configure SSL policies to control the establishment of SSL connections.

  • Configure SSL control system to construct policies and establishment of SSL connections.

• Allow or block the TLS and SSH ciphers in SonicOS.

  • SSL (Secure Sockets Layer) encryption, and its more modern and secure replacement, TLS (Transport Layer Security) encryption, protect data sent over the internet or a computer network. SSL/TLS encrypts communications between a client and server, primarily web browsers and web sites or applications.

• Use RBL filters to block SMTP emails to look up in the database of suspected spammers, and malicious / open mail relays.

• Firewall Workflow