• SonicOS 7.0 Diagnostics for Classic Mode
• Introduction to Diagnostics for Classic Mode
• Terminal
• Tech Support Report
• Check Network Settings
• DNS Name Lookup
• Network Path
• Ping
• Trace Route
• Real-Time Blacklist
• Reverse Name Lookup
• Connection TopX
• Geo and Botnet
• MX and Banner
• GRID Check
• URL Rating Request
• PMTU Discovery
• Switch Diagnostics
• SonicWall Support
  • About This Document

Terminal

Navigate to notification center, click Open SSH terminal session icon to start a SSH Console Window to issue commands directly to the network security appliance.

SSH management must be enabled for the interface of the device before a SSH session can be started successfully.

To enable SSH management of the device

1. Navigate to Network > Interfaces.
2. Select the interface for which you want to enable SSH management and click the Edit icon.
3. In the Management section, click the SSH toggle to activate SSH management of the device (if it is not already enabled).
4. Click OK.

To start a SSH management session

1. Navigate to notification center, click Open SSH terminal session icon.
2. Click OK when the warning displays with the IP address.
3. The SSH session will start by requesting the administrator login credentials on SSH Console Window.

   SSH management must be ON for this interface.