SonicOSX 7 Device Settings

Technical Documentation > SonicOSX 7 Device Settings > Administering SNMP > Setting Up SNMP Access > Enabling and Configuring SNMP Access > Configuring Object IDs for SNMPv3 Views

Configuring Object IDs for SNMPv3 Views

The SNMPv3 View shows access settings for Users and Groups. You create settings for users and groups, and these security settings are not user-modifiable. The SNMPv3 View defines the Object IDs (OID) and Object ID Groups, and is sometimes known as the SNMPv3 Access Object.

The SNMP View defines a collection of OIDs and OID groups. The initial set of default views cannot be changed or deleted. The default views reflect the most often used views, such as the root view, system view, IP, interfaces. The OIDs for these views are pre-assigned.

Additionally, you can create a custom view for specific users and groups.

You can modify any views that you create. You cannot modify the ones the system creates.

To configure OIDs for SNMPv3 views

  1. Navigate to Device | Settings > SNMP.

  2. Click View.

  3. In the View page, click + Add. The View Name dialog box is displayed.

  4. Enter a meaningful name in the View Name field.
  5. Click Add OID to add OID to the View being created. The Add SNMP OID dialog is displayed.

  6. Enter name in the OID Name field and click OK.

    The OIDs associated with the View Name is listed in the OID table. To delete an OID from the OID List, hover over the OID and click Delete.

  7. Add any more OIDs to associate with the View.
  8. Click OK. The new view is displayed in the View page.

Was This Article Helpful?

Help us to improve our support portal

Yes! Not Really

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden