SonicOS 7.1 High Availability Administration Guide
- SonicOS 7.1
- About SonicOS
- High Availability
- Replacing an HA Primary Unit
- High Availability Config
- Configuration of HA Active/Standby
- Configuring Active/Standby High Availability Settings
- Configuring HA with Dynamic WAN Interfaces
- Configuring Network DHCP and Interface Settings
- Disabling the SonicOS DHCP Server
- Configuring Virtual IP Addresses
- Configuring Redundant Ports
- Fine Tuning High Availability
- Advanced Settings
- Configuring Advanced High Availability Settings
- Monitoring High Availability
- Configuring Active/Standby High Availability Monitoring
- Configuring Active/Standby High Availability Settings
- IPv6 High Availability Monitoring
- About This Document
- Azure Use Cases
- SonicWall Support
Active/Standby High Availability Status
Active/Standby High Availability provides basic high availability with the configuration of two identical firewalls as a High Availability pair. On a firewall that belongs to an Active/Standby HA pair, the DEVICE | High Availability > Status page displays information about the state, configuration, and licenses on the HA pair.
Was This Article Helpful?
Help us to improve our support portal