• SonicOS 7.1
• About SonicOS
  • Working with SonicOS
  • SonicOS Workflow
  • How to Use the SonicOS Administration Guides
  • Guide Conventions
• High Availability
  • About High Availability
    • High Availability Terminology
    • High Availability Modes
    • High Availability Encryption
    • Crash Detection
    • Virtual MAC Address
    • Dynamic WAN Interfaces with PPPoE HA
    • Stateful Synchronization with DHCP
    • Stateful Synchronization with DNS Proxy
    • About HA Monitoring
  • Understanding High Availability
    • Understanding SonicWall High Availability Operation Modes
    • About Active/Standby HA
  • Benefits of Active/Standby HA
    • Working of Active/Standby HA
    • About Stateful Synchronization
    • Benefits of Stateful Synchronization
  • How Does Stateful Synchronization Work?
    • Example of Stateful Synchronization
    • Active/Standby Prerequisites
  • Supported Platforms and Licensing for HA
    • Physically Connecting Your Security Appliances
    • Maintenance
      • Removing an HA Association
      • Replacing a SonicWall Security Appliance
• Replacing an HA Primary Unit
  • Replacing an HA Secondary Unit
    • High Availability Status
    • Active/Standby High Availability Status
    • High Availability Status
• High Availability Config
  • High Availability Licenses
  • Configuring High Availability
• Configuration of HA Active/Standby
  • Configuring Active/Standby High Availability Settings
    • Configuring HA with Dynamic WAN Interfaces
    • Configuring Network DHCP and Interface Settings
    • Disabling the SonicOS DHCP Server
    • Configuring Virtual IP Addresses
    • Configuring Redundant Ports
    • Fine Tuning High Availability
    • Advanced Settings
    • Configuring Advanced High Availability Settings
    • Monitoring High Availability
    • Configuring Active/Standby High Availability Monitoring
• IPv6 High Availability Monitoring
  • IPv6 HA Monitoring Considerations
  • SonicWall Support
• About This Document
  • Configuring Active/Standby High Availability Monitoring
  • IPv6 High Availability Monitoring
  • IPv6 HA Monitoring Considerations
• Azure Use Cases
  • Use Case 1: Manage Azure HA Firewall
  • Use Case 2: Forward LAN traffic to the External Network through the Gateway after HA Failover
  • Use Case 3: Configure DNAT on Azure HA Firewall
  • Use Case 4: Configure DNAT on Azure HA Firewall (Need to move multiple floating IPs support)
• SonicWall Support
  • About This Document

Use Case 2: Forward LAN traffic to the External Network through the Gateway after HA Failover

The interface IP (aka floating IP) in the Azure HA environment is set as the default gateway of the LAN subnet. When LAN traffic forwards to the external network through the gateway, traffic will automatically flow into the active HA Azure firewall without flowing into the standby HA Azure firewall. This is because the interface IP always floats to the active HA Azure firewall. After HA failover, the active HA Azure firewall will change to the standby firewall, so traffic will be forwarded to the newly active firewall.