• SonicOS 7.1
• About SonicOS
  • Working with SonicOS
  • SonicOS Workflow
  • How to Use the SonicOS Administration Guides
  • Guide Conventions
• High Availability
  • About High Availability
    • High Availability Terminology
    • High Availability Modes
    • High Availability Encryption
    • Crash Detection
    • Virtual MAC Address
    • Dynamic WAN Interfaces with PPPoE HA
    • Stateful Synchronization with DHCP
    • Stateful Synchronization with DNS Proxy
    • About HA Monitoring
  • Understanding High Availability
    • Understanding SonicWall High Availability Operation Modes
    • About Active/Standby HA
  • Benefits of Active/Standby HA
    • Working of Active/Standby HA
    • About Stateful Synchronization
    • Benefits of Stateful Synchronization
  • How Does Stateful Synchronization Work?
    • Example of Stateful Synchronization
    • Active/Standby Prerequisites
  • Supported Platforms and Licensing for HA
    • Physically Connecting Your Security Appliances
    • Maintenance
      • Removing an HA Association
      • Replacing a SonicWall Security Appliance
• Replacing an HA Primary Unit
  • Replacing an HA Secondary Unit
    • High Availability Status
    • Active/Standby High Availability Status
    • High Availability Status
• High Availability Config
  • High Availability Licenses
  • Configuring High Availability
• Configuration of HA Active/Standby
  • Configuring Active/Standby High Availability Settings
    • Configuring HA with Dynamic WAN Interfaces
    • Configuring Network DHCP and Interface Settings
    • Disabling the SonicOS DHCP Server
    • Configuring Virtual IP Addresses
    • Configuring Redundant Ports
    • Fine Tuning High Availability
    • Advanced Settings
    • Configuring Advanced High Availability Settings
    • Monitoring High Availability
    • Configuring Active/Standby High Availability Monitoring
• IPv6 High Availability Monitoring
  • IPv6 HA Monitoring Considerations
  • SonicWall Support
• About This Document
  • Configuring Active/Standby High Availability Monitoring
  • IPv6 High Availability Monitoring
  • IPv6 HA Monitoring Considerations
• Azure Use Cases
  • Use Case 1: Manage Azure HA Firewall
  • Use Case 2: Forward LAN traffic to the External Network through the Gateway after HA Failover
  • Use Case 3: Configure DNAT on Azure HA Firewall
  • Use Case 4: Configure DNAT on Azure HA Firewall (Need to move multiple floating IPs support)
• SonicWall Support
  • About This Document

Use Case 3: Configure DNAT on Azure HA Firewall

Configure a DNAT to remap the traffic of an interface IP (192.168.1.254, aka floating IP) accessing the firewall from the Internet to the traffic of a particular machine (192.168.2.200) in the LAN.

Floating IP always on active firewall

After HA failover