SonicOS 7.1 Firewall

Internal VLAN

The Internal VLAN section allows you to specify the starting VLAN ID. Every single interface on the firewall is separated by using VLANs internally. By default, it starts at 2. In SonicOS 7, the default vlan id starts at 3968. If you are configuring/using VLAN sub-interfaces on the switch directly connected to the firewall using the same Internal VLAN ID, it might cause unexpected issues. This feature is available only in classic mode.

To change the internal VLAN ID:

  1. Navigate to Network > Firewall > Advanced page.
  2. Scroll to the Internal VLAN section.

  3. Enter the VLAN ID in the Starting VLAN ID field. The default ID is 3968.
  4. Click Accept.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden