SonicOS 7.1 DPI-SSL

DPI-SSL/TLS Server > Deploying the DPI-SSL/TLS Server > Configuring General DPI-SSL/TLS Server Settings
Table of Contents

Configuring General DPI-SSL/TLS Server Settings

From the General Settings, you can set the services to be included with which to perform inspection.

Make sure that DPI-SSL Server is enabled on a zone or zones according to Enabling DPI-SSL Server on a Zone to apply the DPI-SSL General settings.

To enable Server DPI-SSL inspection

  1. Navigate to the POLICY | DPI-SSL > Server SSL.

  2. Scroll to the General Settings section.
  3. Select Enable SSL Server Inspection.

  4. Select one or more of the services with which to perform inspection:

    • Intrusion Prevention
    • Gateway Anti-Virus
    • Gateway Anti-Spyware
    • Application Firewall
  5. Click Accept.
  6. Scroll down to the SSL Servers section and configure the server or servers to which DPI-SSL inspection is applied. For more information, refer to Configuring Server-to-Certificate Pairings.