• SonicOS 7.1
• About SonicOS
  • Working with SonicOS
  • SonicOS Workflow
  • How to Use the SonicOS Administration Guides
  • Guide Conventions
• About Network
  • DNS Introduction
• Configuring DNS Settings
  • Configuring DNS for IPv4
    • Specifying which DNS Servers are Used
    • Enabling Proxy of Split DNS Servers
    • DNS Rebinding Attack Prevention
    • DNS Rebinding and Cache Lookup
  • Configuring DNS for IPv6
    • Specifying which DNS Servers are Used
    • Enabling DNS Host Name Lookup over TCP for FQDN
  • Configuring Domain-Specific DNS Servers for Split DNS
    • About Split DNS
      • About Per-Partition DNS Servers and Split DNS
    • Adding a Split DNS Server
    • Editing Split DNS Entries
    • Deleting Split DNS Entries
• Configuring Dynamic DNS
  • About Dynamic DNS
    • Supported DDNS Providers
  • Dynamic DNS Profiles
    • Configuring Dynamic DNS Profiles
    • Editing Dynamic DNS Profiles
    • Deleting Dynamic DNS Profiles
• Configuring DNS Proxy Settings
  • About DNS Proxy
    • Supported Interfaces
    • DNS Server Liveness Detection and Failover
    • DNS Cache
    • High Availability Stateful Synchronization of DNS Cache
    • DHCP Server
  • Enabling Log Settings
  • Monitoring Packets
  • Configuring DNS Proxy Settings
    • Configuring DNS Proxy Settings
    • Deleting Static DNS Cache Entries
    • Viewing DNS Proxy Cache Objects
    • Flushing Dynamic DNS Cache Entries
• SonicWall Support
  • About This Document

Specifying which DNS Servers are Used

Regardless of the IP version, you can specify how SonicOS selects the DNS servers.

To specify which DNS servers are used

1. Navigate to Network | DNS > Settings.
2. In the IPv4 DNS Settings, select one of the following:
   • To manually specify the DNS servers:
     1. Select Specify DNS Servers Manually.
     2. Enter up to three IP addresses into the DNS Server # fields.
   • To use the DNS Settings configured for the WAN zone, select Inherit DNS Settings Dynamically from WAN Zone. This is the default. The IP address(es) are populated into the DNS Server fields automatically.
3. Click Accept to save your changes.