SonicOS 7.0 Tools & Monitors
FTP Statistics
Navigate to the MONITOR | Tools & Monitor > Packet Monitor page and select the Statistics tab. FTP Statistics displays the following information:
- Red – Automatic FTP logging is off
- Green – Automatic FTP logging is on
- Yellow – The last attempt to contact the FTP server failed, and logging is now off
To restart automatic FTP logging, see Restarting FTP Logging on page 85.
It also displays these statistics:
- On/off indicator
- FTP Server Pass/Failure count – the number of successful and failed attempts to transfer the buffer contents to the FTP server
- FTP Thread is Busy/Idle – the current state of the FTP process thread
- Buffer status – the status of the capture buffer
If automatic FTP logging is off, either because of a failed connection or simply disabled, you can restart it in Configure > Logging.
To restart FTP logging
- Navigate to the Tools & Monitors > Packet Monitor page.
- Select the General tab.
- Select the Logging tab.
- Verify that the settings are correct for each item on the page. (Refer to Configuring Logging Settings for more information.)
- To change the FTP logging status page to active, select Log To FTP Server Automatically.
- Optionally, test the connection by clicking Log Now.
- To save your settings and exit the dialog, click Save.
Was This Article Helpful?
Help us to improve our support portal