• SonicOS 7.0
• Using Packet Monitor
  • Benefits of Packet Monitor
  • How Does Packet Monitor Work?
  • Supported Packet Types
  • Configuring Packet Monitor
    • Configuring General Settings
      • Configuring General Settings
      • Configuring the Monitor Filter
      • Configuring Display Filter Settings
      • Configuring Logging Settings
      • Configuring Advanced Monitor Filter Settings
      • Configuring Mirror Settings
        • Starting and Stopping Packet Mirror
  • Monitoring Captured Packets
    • Starting and Stopping Packet Capture
  • Viewing Packet Monitoring Statistics
    • Capture Statistics
    • Local Mirror Statistics
    • Remote Mirror TX Statistics
    • Remote Mirror RX Statistics
    • FTP Statistics
    • Current Buffer Statistics
• Viewing Connections
  • Searching the Connections
  • Filtering the Connection Log
  • Connections Log Functions
• Monitoring Core 0 Processes
• Using Packet Replay
  • Single Packets
    • Packet Crafting
    • Packet Buffer
  • Replay Pcap File
    • Replaying an IP Pcap File
    • Replaying a MAC Pcap File
  • Captured Packets
    • About Captured Packets
    • Packet Detail
    • Hex Dump
• SonicWall Support
  • About This Document

Remote Mirror TX Statistics

Navigate to the MONITOR | Tools & Monitor > Packet Monitor page and select the Statistics tab. The Remote Mirror TX Statistics status indicator shows the following:

• Red – Mirroring is off
• Green – Mirroring is on and a remote SonicWall network security appliance IP address is configured
• Yellow – Mirroring is on but disabled because the remote device rejects mirrored packets and sends port unreachable ICMP messages

It also displays these statistics:

• On/off indicator
• Mirroring to – The specified remote SonicWall IP address
• packets mirrored – The total number of packets mirrored to a remote SonicWall network security appliance
• pkts skipped – The total number of packets that skipped mirroring because of packets that are incoming/outgoing on the interface on which monitoring is configured
• pkts exceeded rate – The total number of packets that failed to mirror to a remote SonicWall network security appliance, either because of an unreachable port or other network issues